ROLAND SH-32
Owner's Manual

Chapter 3. Applying Effects to the Sound (INS-FX, REV/DELAY)

Setting the Insertion Effects
You can set a variety of parameters in each Patch or Rhythm Set for the Insertion Effects selected with the effect type.

Using the Reverb/Delay (REV/DELAY)
This section explains the procedures used when working with Reverb/Delay.

Using the INTENSITY Knob
Assigned to the INS-FX [INTENSITY] knob is the specific parameter that is best suited for adjustment with the knob. The parameter assigned is predetermined for the selected effect type.
fig.03-07a

Turning the Reverb/Delay On and Off
You can set whether Reverb/Delay are used (switched on), or not used (switched off) in each Patch, Rhythm Set, or Performance. Turn these settings OFF when you wish to listen to the unprocessed sound as you create a sound, or when you wish to use external effects

Rotate [INTENSITY] while [INS-FX] is lit to change the amount of the effect applied. The functions of parameters that may be set differs according to the effect selected with the effect type. For more details, refer to �Insertion Effects Parameters� (p. 107). After adjusting the effect with [INTENSITY], the knob�s settings are saved when you press [WRITE] and carry out the write procedure.

processors instead of the built-in effects.

In Part Assign mode (p. 71), the following procedure switches each Part on and off, and the Reverb/Delay for the selected parts is switched on or off. In addition, you can turn the individual Rhythm Tones (percussion instruments) in Rhythm Tone Edit (p. 69) on and off. 1. Press [REV/DELAY], to switch the effect on or off. The effect is on when the indicator is lit, and off when the indicator light is off.
fig.03-03

Using the FX/SYSTEM Knob and [VALUE �/�]
1. Confirm that the SH-32 is in Patch mode. 2. Turn the FX/SYSTEM knob to the parameter to be set; select �COLOR,� �RATE (DEPTH),� or �LEVEL.�
fig.03-08

2. To save the settings, press [WRITE] and carry out the write procedure (p. 63, p. 70, p. 73).

Selecting the Reverb/Delay Type (TYPE)
The functions of parameters that may be set differs according to the effect selected with the effect type. For more details, refer to �Insertion Effects Parameters� (p. 107). 3. Press [VALUE �/�] to select a value. The SH-32 features 10 different types of internal Reverb/Delay effects; you can select the effect type for each individual Patch or Rhythm Set. 1. Confirm that the SH-32 is in Patch mode. 2. Rotate the FX/SYSTEM knob to �TYPE� in the �REV/DELAY� You can make settings for the selected parameter only when the indicator to the left of the FX/SYSTEM knob is blinking. 4. When you finish making settings, press [EXIT] to end the procedure. 5. To save the settings, press [WRITE] and carry out the write procedure (p. 63, p. 70). section.
fig.03-04.e

blinking

3. Press [VALUE �/�] to select which of the effects you want to use. For details on the Reverb/Delay, refer to �Reverb/Delay Parameters� (p. 113). 4. When you finish making settings, press [EXIT] to end the procedure. 5. To save the settings, press [WRITE] and carry out the write procedure (p. 63, p. 70).

65

Chapter 3