The service manual was very usable and clear enough to see the individual values of all of the components (unlike some of the service manuals I have gotten in the past from web sites similar to this one). The price was right and the information was greatly appreciated. It helped me with an otherwise very difficult repair. It was much needed and appreciated. A faster turn around on my order would be nice, but I understand the constraints on your staff's time. Thank you for your service.
I liked the price plus it had everything i needed to service the tv.
thankyou Tim Hertz
Text excerpt from page 69 (click to view)
SH-D505
TROUBLE SHOOTING TABLE (Continued)
A
Check the LEDs (D5001, D5002) on the main PWB. Does the D5002 light up in green? YES A DTV signal (available in the selected channel) is locked.
NO
There is no DTV signal for the selected channel. Some troubles exist on tuner and/or VSB (IC5002).
Does the D5001 (red) go out? YES The tuner and VSB function well. Check IC5201 and IC5211~IC5213 for trouble.
NO
If D5025 starts flashing or stays on in red, it means the reception condition is bad with many errors.
* Because of poor reception condition, DTV programs may be affected by the VSB out of lock (D5002 off) or reception error (D5001 on or flashing). Possible causes include: that signals being received by the antenna are too weak or too strong. that received signals contain remarkable ghost and other interference.
Make sure the video cable is properly connected. Make sure the video output mode corresponds to a monitor being hooked up.
No video output (audio output available)
Check the Video decoder (IC5401) and SDRAM (IC5402,IC5403)