|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Although printing quality is not the best, the manual was very helpful in order to reactivate this ancient but still good electronic musical instrument.
 ;
as a first-time user and buyer from this site, i found the overall service outstanding!! this product is a godsend as, without it, i would never have been able to find my way around and use my machine as intended. i will certainly use this site again as required. many many thanx!!
;
This manual is exactly what I needed. This site always has every manual I need, and it is also much less expensive then most other sites. This is the only manual site I will use.
;
Useful manual, good scan, worth the pay if you find the unit difficult to operate.
;
Exactly as described, the full user-manual (145 pages). Perfect.
OWNERS MANUAL
PRODUCT DESCRIPTION � The Shenandoah� Stereo 60
input and channel 1 is also equipped with an XLR balanced microphone input (with phantom power). The 2 inputs on channel 1 are summed (mixed) together at a 1:1 ratio. Each channel offers a 3 band equalizer with a sweepable midrange frequency control. Equalization centers were carefully selected for use with acoustic instruments. Each channel also contains individual send controls to the on-board Alesis® 15 program STEREO digital effects circuit. The channel signals are then summed together, mixed with the digital effects return and passed on to the internal dual 30 unbalanced line output, and two 1/4� speaker jacks.
INPUTS � The Shenandoah� Stereo 60 is equipped with 2 types of input jacks. The ¼� input is unbalanced and
accepts instrument level to line level with a useable sensitivity from 100 mV to 1 volt. The input impedance is 300 k ohms. The ¼� input will also accept most active balanced line sources, automatically unbalancing them by recognizing the tip portion of the balanced signal. Additionally, the precision input scaling preamp contains a 50 Hz, 12 dB/octave interference) to eliminate unwanted noise. The XLR input jack is balanced and �microphone level�, with a useable sensitivity from �60dBv to �30 dBv. It contains a precision full range differential microphone preamp with phantom power. For use with higher level sources (such as the balanced line level output from a keyboard), a balanced pad network will be necessary to use the balanced input. Phantom power is 13.6 volts, compatible with virtually all commonly used live sound condenser microphones. Dynamic microphones can be used with no ill effect.
1
|
|
|
> |
|
