|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
The manual was very clear and contained all the information I was looking for. My dishwasher is working again because of this servicemanual!
;
Quality scan, great manual. I solved my problem with this manual.
 ;
The AKAI 1720 model reel to reel tape recorder described in this Manual is quite an old unit - circa late 1960's. As a consequence, the description of the mechanical details - and adjustments thereof - is quite critical. The manual does this quite well. The schematics are also well presented and have detailed PCB overlays. Probably the only negative is that some half-tone detail has been lost from the original manual as it has been scanned in simple B&W.
;
Perfect source for service manuals: fast and professional transaction; high quality, perfect readable and largely scaleable PDF; complete schemes, diagrams and spare part list. Tnx a lot, cu again!!!!
;
I got your link from a friend and I must say that I am really satisfied with your service. Specially this B&O manual I didn't find anywhere on the web... but you could deliver it :-) . You deliver very fast and the copy is of good quality. So your webpage is bookmarked. Thanks
1
2
3
4
1. REASSEMBLY AND DISASSEMBLY PRECAUTIONS
A
� The grille is inserted into the baf�e. To detach it, insert a grill removal tool into each of the 4 corner holes of the grille net and pull it out carefully. � The subframe is attached to the baf�e frame by 4 external screws. To detach it, unfasten those screws. (for IW631 and IW651) � The crossover networks is attached to the baf�e frame by 4 external screws. To detach them, �rst disconnect the speaker's wires. Next remove the baf�e frame. Then unfasten those screws.
B
� The tweeter is attached to the baf�e by 2 external screws. To detach it, unfasten those screws. When re-attaching it, face its terminal rightward. [S-IW631-LR, S-IW831-LR only] � The woofer is attached to the baf�e by 4 external screws. To detach it, unfasten those screws. When re-attaching it, face its terminal lower right. � Attach the speaker frame to the wall /ceiling, and tighten the screws lightly (temporary attachment). At this point the rotating clamp will rotate so that the rotating clamp and frame are clamped on to the wall/ceiling. Gently try pulling the speaker forward and check that all of the rotating clamps have rotated outwards and are lightly clamping to the wall/ceiling. Speaker frame Screw
C
Rotating clamp
D
� Tighten the screws �rmly using no more than the maximum torque speci�ed. Allowable maximum torque: 1.0 N.m
E
F
2
1 2
S-IW631-LR
3 4
|
|
|
> |
|
