perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Great manual, would not have been able to operate my machine without it!!
James Dawson August 18, 2012
Text excerpt from page 4 (click to view)
Features
A masterpiece amongst turntables with a worldwide reputation. Highly accurate turntable speed maintained continuously with a quartz pitch control.
�The pitch can be varied throughout the range maintaining perfect accuracy. �Pitch can be instantly reset to the rated speed (33 1/3 or 45 r/min) with the reset button.
Controls
The direct drive produces high torque.
�Wow and flutter below 0.01 %. Starting torque of 1.5 kg-cm enabling the turntable to reach 33 1/3 r/min in 0.7 seconds. �Smooth stops are achieved with a fully electronic braking system. The braking speed can be adjusted with the brake speed control knob.
-8 6 4 2 +8 2 6 4 +8
Tone arm with gimbal suspension
�Using the balance weight control measurement units on the tone arm, you can quickly change stylus pressure settings to the appropriate pressure. �Stylus skipping can be reduced using horizontal weight control for scratch play. �The tone arm can be finely adjusted in a range of 6 millimeters with the lockable height control.
Anti-vibration design with 3 layer cabinet construction and large insulating legs. Pop-up stylus light.
�A light illuminates the stylus.
Attach a cartridge (not included).
Follow the cartridge�s instructions to correctly attach it to the head shell. �Use the included shell weight when using a light cartridge (3.5 to 6.5 grams).
Screws Head shell Shell weight Lead wire Terminal Cartridge Stylus
2
Adjust the overhang.
Fit the included overhang gauge to the head shell. Adjust the overhang and facing of the cartridge and tighten the screws. �Line the stylus tip up with the end of the gauge. �The cartridge should be parallel on the shell head. Screws