There are currently no product reviews.
 ;
About one hour after checkout, the manual was available for download. Clear reading and detailed. Thanks
 ;
Excellent transaction - clean document received - Thanks a lot
 ;
Manual is in German but complete. I needed this one to fix a long lasting problem with the internal PSU of the camera. Most of the capacitors begin to leak after a few years wich results in the inability to power on the camera. When you try to turn it on the power led flickers and the unit directly turns off. Thanks to this manual I was able to locate all bad cap's and to dis- and reassemble the camera without any problems.
 ;
We received the manual in a timely manner and it was exactly what we were expecting.
 ;
Excellant, finally this is want I need and searching for The service manual is fantastic and thank you to owner-manuals.com and its service. Price is reasonable. It's a bit slow on my end in downloading but manage to receive the whole manual without a break. once again, thanks.
SERVICE MODE
Function
KEY
Name
Details OPERATING METHOO
DEFAULT
ADJUSTMENT
remark
S10
PC ADJUSTMENT
S11 S12
OPTION Shipping
GAIN R GAIN G GAIN B OFFSET R OFFSET G OFFSET B TELETEXT OPTION DELAY -
S10 � PC MODE � PC SIGNAL ADJUSTMENT (IF EEPROM ERASE(S5) IS ON, THIS SETTING IS ERASED. DEFAULT ADJUSTMENT 10 10 10 -30 -30 -30 west-eu, east-eu, russia, greek, arabic, farci, arabich TOP&FLOP, TOP, FLOP, NON 03 (PAL=1 YC DEALY)
FIX FIX FIX FIX FIX FIX TTX language select TTX sorting mothod select FIX It is erased factory freqency table (exepting for s8,9,10,11)
5-2-2. Description of SERVICE MODE ITEM A. S1(1): Heat-Run Key => This key can check ROM VERSION. B. S2(2): I2C STOP Key => This key only use for R&D. C. S3(3): Sound/ Timer test Key => This key can check sound and decide a defect of Timer LED. D. S4(4): Tilt test Key => This key only use for adjustment of factory. E. S5(5): EEPROM Erase Key => After Mi-com update, you must erase EEPROM data using this key. F. S6(6): DECODER Key. => For the CVBS signal (Main and Sub in PIP mode) adjustment, this key adjust brightness, contrast and color. G. S7(7): PANEL TEST Key. => Using this key, you can test problem of PANEL, as confirm white pattern, red pattern, blue pattern, green pattern H. S8(8): PANEL WHITE BALANCE Adjustment Key => Using this key, you can adjust PANEL WHITE BALANCE. GAIN R,G,B: As adjust this factor, you can increase or decrease Contrast of each color. OFFSET R,G,B: As adjust this factor, you can increase or decrease Black Level of each color. I. S9(9): COMPONENT VIDEO Adjustment Key => Using this key, you can adjust WHITE BALANCE of COMPONENT VIDEO. Y, Cb, Cr DRIVE: As adjust this factors, you can increase or decrease Contrast of each color. Y, Cb, Cr OFFSET: As adjust this factor, you can increase or decrease Bright Level of each signal. J. S10(10): PC ADJUSTMENT Key. => Using this key, you can adjust WHITE BALANCE of PC. GAIN R,G,B: As adjust this factor, you can increase or decrease Contrast of each color. OFFSET R,G,B: As adjust this factor, you can increase or decrease Bright Level of each color. K. S11(LOCK): OPTION Key => Using this key, you can select TTX language, TTX sorting method. TELETEXT(language): West-EU, East-EU, Russia, Greek, Arabic, farci, arabich OPTION(sorting method): TOP&FLOP, TOP, FLOP, NON DELAY: Don�t Adjust this factor. L. S12(SLEEP): Shipping key => Using this key, you can set up at shipping mode.
-28-
|