|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Manual acquired with good resolution, complete in all its pages, very good policy of the folder where are saved all products purchased.
 ;
Service manual very complete and clear. It was very helpfull for my work.
;
This is the 2nd time I download manuals from this website and I can say it's what I was expecting. It contains schematic, layout (decent quality), short description, parts and dissasembly instructions. I recomend it for anyone who wants to repair/modify this device.
;
Very useful Service Manual! With it I was able to identify the damaged pots in my old amplifier, purchase the adequate replacements and make myself the repair.
I have again my old amplifier, still a very good one that I will keep for as many years as I can!
Thanks to Owner Manuals!
;
Good price for the manual and easy to locate on the site and download. Plus, just like the original. Thanks a lot.
4-3
4-3
Internet A/V Module � Service Hints
The Internet A/V Module StreamIOm G1.0/LinX is not intended to be repaired on component level. Only the complete Printed Board Assembly and the Wireless LAN Card are available as service spare part. These articles can be ordered with the following codenumbers: StreamIOm G1.0/LinX PBAS .......3103 308 67790 Wireless LAN Card.......................9307 008 01371 Important note: When replacing the Internet A/V Module the set 12NC must be programmed into the module before returning the set to the customer !! The 12NC depends on the stroke version of the set and can only be programmed with the help of an external application � the so-called Factory Test Server.
Factory Test Server Application
StreamIOm G1.0/LinX Internet A/V Module
This module is not intended to be repaired on component level. Circuit Diagrams and Printed Circuit Board drawings are published for orientation only. In case of defects please replace the entire module. Modules can be ordered with codenumber �3103 308 67790�.
The Factory Test Server serves two purposes: 1. To test the Internet streaming of the module, without having a broadband Internet connection present. 2. To program the SET 12NC into the module after replacement. The Factory Test Server Application is available at dedicated workshops, only. Basic requirements: � PC running Windows NT4 Service Pack 6 or higher, Windows 2000, or Windows XP Pro � 400MB hard disk space � Ethernet network card � Ethernet crossover cable or Ethernet hub with standard patch cable � Wireless Access Point � Mouse � Monitor � CD-ROM drive (for installation)
For detailed instructions on how to install, setup and use this application please refer to the �Factory Test Server Application Manual�, included on the CD-ROM.
|
|
|
> |
|
