Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
Text excerpt from page 35 (click to view)
Recording onto CD-R/RW Discs
� Select �CD + LINE� to mix and record a CD loaded in the 3-CD changer with the signals from an external source via the LINE IN terminal.
3
Press the 1 REC/REC MUTE button (main unit/ remote control) to put the CDR in the recording pause mode.
� The remaining recording time on the disc is shown in the information display.
4
Press the MENU button (main unit/remote control) and use the MULTI JOG/REC LEVEL and MIX BALANCE controls to adjust the recording level and mixing balance while playing the two sources. .
MULTI JOG REC LEVEL
�
+
MIX BALANCE
MIX BALANCE
LINE
CD
LINE
CD
CD recording level is reduced.
Line input recording level is reduced.
� Adjust the recording level so that the 0 dB display of the level meter is not exceeded when the highest signal is applied. � The pitch controls may be used to adjust the speed of CD playback for mixing and recording purposes. � When you have finished adjusting the recording level and the mix balance, set the sources back to the point where you want to start recording from.
5 6
Press the CDR Control PLAY p button on the main unit to start recording. Start playback of the sources to be recorded.
To stop recording at any time Press the CDR Control STOP s button on the main unit or the s (stop) button on the remote control. The Play p indicator in the display window will flash and operation stops.
