PANASONIC SLSV500
Owner's Manual

Listening to CDs
Skip play

Other Play Methods

The letters such as B in the various illustrations refer to the descriptions in the �Location of Controls� section. (See page 2.)

Program play
Up to 24 tracks can be entered in the programmed sequence. Preparation: Put unit in stop mode.

Repeat play/Random play
Press during play or stop mode.

The disc plays from the specified track through to the end, then play stops automatically. Preparation: Put unit in stop mode.

1

Select the desired track.

1

Select the desired track.

J

FM RECEPT CITY/NOR MODE

B

B

Each time the button is pressed; �1`�#�`�#�RANDOM� #�RANDOM`� ^ ------------=� �(Cancel)( ______ --}

2 2
I Changing the sound quality
Press during play or stop mode.

Register in sequence.

S-XBS RANDOM

(The indication �M� and the programmed sequence appear on the display.)

1

C

1`(1-track repeat)

C
MEMORY/ RECALL

One track is repeated.

`(All-track repeat) RANDOM (Random)
then play stops.

All the tracks on the disc are repeated. The tracks play once each in random order and

3 4

Repeat steps 1 and 2 to program all the desired tracks.

RANDOM, `(Random repeat)
The tracks play repeatedly in random order.

F
S-XBS

I
� (Cancel)

When pressed during program play
Each time the button is pressed; �1`M�#�`M� #�M�(Cancel) ^---------------------------------------=}
S-XBS

Each time the button is pressed; �S-XBS�> �
S-XBS
C

� To program the same track in the sequence more than once
� After step 2, press [MEMORY/RECALL] the desired number of times.

1

M
C

S-XBS:
Select this setting to boost the low frequency range response.

� If �'� is displayed
� No more tracks can be programmed.

1`M (1-track repeat)
One track is repeated.

`M (Memory repeat)
The programmed tracks are repeated.

� To confirm the contents of the program Note!
The setting returns to S-XBS when you disconnect the power source. � Press [MEMORY/RECALL] while the disc is playing. (The numbers of the programmed tracks appear on the display in sequence.)

Note!
�You can select the first track to play in random play and random repeat play by pressing [9/i] while the disc is stopped. All the tracks are played. �You cannot select random play or random repeat play during program play. �The resume function does not work when random or random repeat are on. �The mode is canceled when you disconnect the power source.

� To delete the entire programmed sequence
� Press [�, OPR OFF].

Note!
The repeat and random play modes are canceled after steps 1 and 2.

Anti-Skip System
This system deals with skipping in a variety of ways:
�An anti-skip mechanism prevents skipping caused when play speed changes due to swinging of the unit. �A recovery system immediately returns the laser pickup to its original position if it is knocked off the track by a strong shock. �An anti-skip memory (max. 48 seconds) fills in interruptions caused by bumps and vibrations. The anti-skip system works automatically while the unit is on and cannot be canceled.

When bumps continue repeatedly
The message �SORRY� appears on the display and sound is interrupted.

Note!
�While the system is on, the disc rotates at a higher rate than usual in collecting extra audio data. This could result in a slight increase in disc rotation noise. �The anti-skip memory compresses digital signals.

AUTO S-XBS RANDOM CITY MONO FM MEMORY 1 M SORRY TUNED

E

AM VOL

C

4