|
Who's Online
There currently are 6042 guests and 1 member online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Good qulity. Even as it is an old manual (from 1991-1992) it has a good scanned quality and is complete, including user's manual, disassembly intructions, diagrams and schematics, ajustments, troubleshooting and parts list, as usual with SONY manuals and Owner-manuals service.
;
tres bon document
cela a permis de verifier la connection de l'ecran
merci
salutations
;
The manual was of good quality with high resolution schematic diagrams.
;
The manual was very clear and contained all the information I was looking for. My dishwasher is working again because of this servicemanual!
;
Quality scan, great manual. I solved my problem with this manual.
<Example> Follow the below steps when E-1 is displayed. (Cause: Focus balance (FBC) is set beyond the limit.)
- Check if 1. the waveform or voltage of the focus servo circuit is correct, and 2. the optical pick-up returns to the normal state by exchanging the traverse deck.
Follow the below steps when E-4 is displayed. (Cause: Focus gain (FGC) is set beyond the limit.)
- Check if 1. the waveform or voltage of the focus servo circuit is correct, 2. the focus coil of the optical pick-up is correct (around 8 ohms), and 3. the optical pick-up returns to the normal state by exchanging the traverse deck.
Follow the below steps when E-F is displayed. (Cause: All adjustments (TGC, FGC, TBC, FBC) are set beyond the limit.)
- Check if 1. the optical pick-up returns to the normal state by exchanging the traverse deck, and 2. the waveform or voltage of the servo ICs are correct.
Note: It is not always necessary to exchange the traverse deck when an error message is displayed. Be sure to check if the circuit is defective or not before exchanging the traverse deck.
Note:
17
|
|
|
> |
|