|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
This service is relatively cheap, document is fast available, schematic is readable.
Thanks.
 ;
So far I´m a satisfied customer. I have only downloaded "TECHNICS SX-KN470 Service Manual" maybe I will use it later.
Best regards
Peter
;
Good manual. It is complete and of high quality, both text and graphics. The schematics are with the original big size, so it can be viewed or printed without any loss of resulution and sharpness.
;
We needed a manual quickly...online it was available immediately, at a very low price. We loved the convenience!
;
Excellent!!
Got what I need and very fast!!
Thank You
SLV-LX55/LX66S/LX77S
5. Alignment and Adjustment
5-1 Reference
1) X-Point (Tracking center) adjustment and �Head switching adjustment� can be adjusted with remote control. 2) When replacing the Micom (IC601) and NVRAM (IC603 ; EEPROM) be sure to adjust the �Head switching adjustment�. 3) When replacing the cylinder ass�y, be sure to adjust the �X-Point� and �Head switching adjustment�. 4) How to adjustment. - Monmently short-circuit the test point on Main PCB with pincers to set the adjustment mode. - If the corresponding adjustment button is pressed, the adjustment is performed automatically. - If the adjustment is completed, be sure to turn the power off.
5-1-1 Location of adjustment button of remote control
1
2 5 8 0
3 6 9
X-Point (Tracking Center) Adjustment
4 7
Head Switching Adjustment
Fig. 5-1
5-1
|
|
|
> |
|
