|
There are currently no product reviews.
 ;
Another excellent aquisition. Fine detailed manual. Thanks
 ;
Good quality for the scan, complete, but as usual for Tascam, not so comprehensive !
;
great manual readable & easy to downlaod to be recommanded
;
Very useful, not the best scan, but definitely readable !
;
Complete service manual, good quality scan, great buy !
1
2
3
4
A
8 Auto Standby switch (AUTO STANDBY)
a Line Level Input terminal (LINE LEVEL INPUT)
Switches the Auto Standby feature on/off. When switched ON (the default setting is OFF), the Auto Standby feature becomes active. In this mode, if there is no input signal for 12 minutes the system automatically switches to standby. The power is automatically switched on again if an input signal is detected. NOTE: � There may be cases where a connected component outputs noise or some other non-audio signal which causes this system to automatically power on when in Auto Standby mode. If this happens, switch off the Auto Standby mode and switch the system on/off manually.
9 Line Level Output terminal (LINE LEVEL OUTPUT)
Connect to the SUBWOOFER PREOUT terminal of an amplifier or receiver, with the specially provided RCA plug cord.
b AC INLET
� Connect the power cord to the powered subwoofer unit�s AC INLET. � Connect the power cord to a AC socket.
S-LX70W Music mode Frequency response
100 90 80 70 60 50
S o n d p s u r e level (dB)
Non-bypass (Crossover 200 Hz) Bypass
B
Used for connecting other equipment through the amplifier. The signal output from this jack is not affected in any way by the settings of the various controls on the unit.
C
40 10 100 1000
Frequency (Hz)
10000
D
E
F
8
1 2
S-LX70W
3 4
|
