This manual covers the main equipment features only. While it also includes the procedure for saving and loading from the now long obsolete memory cards it does not mention the how to operate with the optional floppy drive interface so I am still at a loss about how to use this! Note that there is a separate manual covering the MIDI interface and programming via the keyboard, not included in this download. You will also need to get hold of this if you want to use the MIDI interface properly. Basically there is little difference between this manual and the free to download manual for the similar PR60 model.
Nothing wrong with the manual or the delivery - came to me the same day I ordered it. But afterwards I realized that I ordered the wrong manual. Probably better with the Quick start - version. So maybe it would be better if we could see a list with inhold for each manual before ordering?
Bought T4850 High End Tuner a few years ago, but i didn't know where all the buttons were used for. So i purchased the owners manual. Perfect! Just what i needed.
Text excerpt from page 28 (click to view)
Caring For Your Cooktop And Lower Oven Contlnued !Seif-Cleaning oven
For areas outside the Self-Cleaning area use warm, soapy water or soapy steel wool pads. l Follow directions starting on page 22, �Using the SefLCleaning cycle.' l Do not use commercial oven deanem. l Do not use foil to line the bottom of your SelfCleaning Oven.
Caring for the filters
Grease filters
The Grease Fitters are located beneath the microwave oven. These filters should be removed and cleaned at least once a month. 1. To remove the filters: Place thumb in the indentation at the center front of the fitter. Push back and pull down. 2. To clean the filters: Soak in hot water and a mild detergent. Scrub with soft brush and swish to remove embedded dirt and grease. Rinse well and shake to dry. NOTE: Filters may be washed in the dishwasher, but aluminum will darken. Using ammonia for deaning will also cause the aluminum to darken. 3. To replace the fitters: Place the long edge of the filter against the clips at the back and push up until it snaps into place.
