|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
perfect copy, im very satisfied, i was need the diagram over the powersupply and
the copy was very sharp
 ;
This is exactly the service manual I needed.
Complete with all schematics, partslists, PCB layouts and alignment instructions.
This manual covers both the T-4970 en T-488F Onkyo tuner.
 ;
IF PRINTED CIRQUIT BOARD WIRING VIEW WAS ONE TONE LIGHTER, THEN 5 STAR RANK HAS TO BE MY CHOISE.
 ;
Very usefull, good quality drawings !
Muito útil encontrei todas as informações necessárias.
 ;
Wanting to repair a neighbours tape recorder I needed the necessary information, it makes it easier. Although the service manual is described as "Language : English" To my dismay I found that it is entirely written in German, a language I do not understand. At least I now have the schematics which will help of sorts. I may not use this service again due to the laguage difficulty after all when it states English you do not expect it to be entirely in another language.
3-3. Initial operation of motor and TV picture are normal but PC image is NG (When the Power LED is lit)
C
Is the front Network indicator blinking?
No
Are the setting and connection of the network correct?
Yes
Is CN302 on the SY-303 board correctly soldered?
No
Yes
No
Yes
Set and connect the network correctly.
Replace the SY-303 board.
Is 22-pin of the flexible flat cable (FA1) correctly connected to CN402 (SY-303 board) and CN302 (VC-292 board)? Yes
No
Connect 22-pin of the flexible flat cable (FA1) correctly.
Solder CN302 on the SY-303 correctly.
Is the signal of CN402 on the SY-303 board correct?
No
Yes Is the signal of CN302 on the VC-292 board correct? Replace the SY-303 board. Yes Replace the VC-292 board. No
Replace the flexible flat cable (FA1).
SNC-RZ30N/RZ30P (E)
3-5
|
|
 |
> |
|