|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Downloaded the manual, reasonably straightforward, pretty much exactly as advertised.
 ;
very helpfull
circuit diagram and sparepart list available
;
Very good reproduction (copy) of original manual. Didn't have a parts list, but schematic was completely labeled with parts. Complete instructions on how to adjust mechanical functions of the 8-track deck. Well worth having and at a very reasonable cost.
;
It's a full manual. All the parts are in there. I haven't found the problem yett, but I am working on it; hope I can rebuild the part myself. To make it more secure and unbreakable this time. Because the part has failed several times before and costs a lot to let it be repaired.
Thanks so much for this rich illustrated and parted manual.
;
I downloaded the document. The manual was complete, well scanned and everything was legible. I could zoom in see what I needed to know. There's not much more that you can ask.
Alignment and Adjustments
5. Alignment and Adjustments
5-1 Lens and Mirror Cleaning
1. Mix the alcohol and ethyl in appropriate proportions. 2. Use a clean cotton cloth or a cleaning paper. 3. Clean the top of the lens by turning it as shown. The pattern starts at the center and proceeds outward, as shown below:
4. Use minimal pressure when rubbing the mirror. Otherwise, the surface will be damaged.
5-2 Focus Adjustment for projection Lens
1. Loosen the 4 screws that secure the optical assembly. 2. After setting the optical assembly on the front cabinet, secure the unit temporarily using the two screws. 3. After applying the liquid crystal panel signal, input a lion head pattern from a pattern generator. 4. Move the focus adjustment screws right and left until the liquid crystal picture element is clearly displayed on the screen. 5. Reposition the optical assembly, and fasten all 4 screws. 6. Check the focus adjustment. 7. Repeat adjustments 1~5, if necessary. FOCUS SECURING SCREW FOCUS SECURING SCREW
FOCUS ADJUSTMENT SCREW
Fig. 5-1
Samsung Electronics
5-1
|
|
|
> |
|
