SAMSUNG SP47W1
Owner's Manual

Switching Your Television On and Off
ENG

The mains lead is attached to the rear of your television.

1
Power

Plug the mains lead into an appropriate socket.

� The main voltage is indicated on the rear of the television
and the frequency is 50 or 60Hz.
VCR Cable DVD SET

TV

2

Press the POWER ( I ) button on the front of the television. Result: The Standby indicator on the front of the television lights up.

3

Press the Power ( ) button on the remote control to switch the television on. Result: The programme that you were watching last is reselected automatically.

� If you have not yet stored any channels, No clear picture
appears. Refer to �Storing Channels Automatically� on page 18 or �Storing Channels Manually� on page 20.

4

To switch your television off, press the POWER ( I ) button again.

Placing Your Television in Standby Mode
Your television can be placed in Standby mode, in order to reduce the power consumption.
Power

The Standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
VCR Cable DVD SET

TV

1

Press the Power ( ) button on the remote control. Result: The screen is turned off and the Standby indicator on the front of the television lights up in red.

2

To switch the television back on, simply press the Power ( ) button again.

�

Do not leave your television in Standby mode for long periods of time (when you are away on holiday, for example). Turn your television off by pressing the POWER ( I ) button on the front of the television. It is best to unplug the set from the mains and aerial.

12