|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Hi, thankyou for providing the Nordmende Globetrotter original manufacturer's repair manual. Quality is very good and sharp - the PDF file was comfortably small to download. The only question is: why did it take so long to become ready for download?? Many thanks anyway, I fixed the fault in the radio thanks to the circuit.
regards: Nick
 ;
This was super service.Ordered this manual and was reading the download an hour later
;
as always, rapid and efficient, very good and clear prints
details clearly visible keep going this way!!!!!!
;
I expect a wonderful result as alaways!!!!!!
Usually is much faster....
;
Wow very wonderful and clear!!!! I will always trust them
5- UPPER CORNER CORRECTION
a) Receive Philips pattern signal. b) When volume-up button is pressed, slide pincushion changes from pincushion to barrel shape. c) When volume-down is pressed, slide pincushion changes from barrel to pincushion shape. d) Adjust the UPPER CORNER CORRECTION to obtain condition as in (fig. 5).
6-LOWER CORNER CORRECTION
a) Receive Philips pattern signal. b) When volume-up button is pressed, slide pincushion changes from pincushion to barrel shape. c) When volume-down button is pressed, slide pincushion changes from barrel to pincushion shape. d) Adjust the LOWER CORNER CORRECTION to obtain condition as in (fig. 6).
7- VERTICAL LINEARITY
a) Receive Philips pattern signal. b) When volume-up button is pressed, upper picture scanning decreases and lower picture scanning increase. c) When volume-down button is pressed, upper picture scanning increases and lower picture scanning decreases. d) Adjust the vertical symmetry to obtain symmetrical scanning between upper and lower picture (fig. 7).
8-VERTICAL ANGLE
a) Receive Philips pattern signal. b) When volume-up button is pressed, vertical angle changes to the right. c) When volume-down button is pressed, vertical angle changes to the left. d) Adjust the VERTICAL ANGLE to obtain condition as in (fig. 8).
9- VERTICAL BOW
a) Receive Philips pattern signal. b) When volume-up button is pressed, vertical bow changes to the right. c) When volume-down button is pressed, vertical bow changes to the left. d) Adjust the VERTICAL BOW to obtain condition as in (fig. 9).
10-VERTICAL AMPLITUDE
a) Receive Philips pattern signal. b) When volume-up button is pressed, vertical size of picture increases. c) When volume-down button is pressed, vertical size of picture decreases. d) Adjust the vertical size to obtain overscan (fig. 10).
11-S-CORRECTION
a) Receive Philips pattern signal. b) When volume-up button is pressed, upper and lower scanning decreases, and center scanning increases. c) When volume-down button is pressed, upper and lower scanning increases, and center scanning decreases. d) Adjust the S-correction to obtain a balance between upper, lower and center (fig. 11).
5
MC-Service
|
|
|
> |
|
