|
There are currently no product reviews.
 ;
Great service. Manual delivered at a great price. Reliable delivery service. They have a great selection. A recommended service!
 ;
I used your service and I found myself well I need service manual teac v plate 770 and I was able to access and remove the belt that erno routes. thanks I recommend it to all
;
At first I thought there had been a mix up as I required the service manual for the cassette unit and the one supplied was for the CD unit. However when I scrolled further down I realised that both had been scanned together! This enabled me to dismantle and repair the cassette unit as intended and I also have a copy of the manual for both the CD and graphic equaliser units should I ever need them. Thanks very much for a great service.
;
Excelent service, the manual is complete, very cheap and fast
Alberto
;
The item received was as described, as expected. I was pleased with the order. Thank you.
SRF-HM03V SECTION 2 DISASSEMBLY
� This set can be disassembled in the order shown below.
2-1.
DISASSEMBLY FLOW
SET
2-2. POWER BOARD (Page 4)
2-4. MICON BOARD, MAIN BOARD (Page 5)
2-3. CABLE SETTING (Page 5)
2-5. PUTTING THE SHEET (A) (Page 6)
Note: Follow the disassembly procedure in the numerical order given.
2-2.
POWER BOARD
8 Remove the eleven solders. green black red blue blue natural
gray black white red POWER board
1 six screws (1.7) 4 three screws (B1.4)
yerrow
knob
S401
6 screw (B1.4) 2
0 POWER board 9 screw (B1.4)
3 two screws (1.7) 7 lid (PWB BATT)
Note: When installing the POWER board, fit the knob and switch (S401).
5 cabinet assy front (L)
4
|
