|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Absolutely perfect! I've been trying to understand how to use all or at least some of the features of the receiver and especially the remote.
;
Copy of genuine owners/operators manual, very useful
;
The manual was a perfect match and was exactly what I was looking for. I'm very satisfied with my purchase.
;
Thank you for having the manual I needed for an older model Aiwa stero I had found on Ebay --- I wanted the Aiwa because I had tapes and cd's but I did not have a manual as to how to operate the system... I found what I needed and it has enabled me to set the system up for my enjoyment.
;
I wished detailed information of the JBL S310 and here I found it! Very happy with the service from this site!
OPERATION
Starting playback
1Switch the power dial to turn on. The speed button and the strobe-illuminator light up. 2Turn on the amplifier�s power. Then, select the function switch. 3Set a record on the platter. To play 45 rpm records, use the included adaptor. 4Set the speed button�s according to the record�s playing speed. 5Press the START/STOP button. 6Hold the head shell�s finger support, and move the tone arm to the desired position over the record. 7Lower the tone arm gently until the stylus is on the record and playback begins. 8Adjust the speed of rotation.
When pitch is on, the speed of the platter can be adjusted in a range of +/-8%,+/-16%,+/-25% by the pitch slider. The speed is lower than the displayed speed when the strobe is flowing to the right, higher than the displayed speed when the strobe is flowing to the left. When the strobe is stopped, the platter is turning at the displayed speed. When the key adjust button is pressed during the pitch control mode, the button lights on, and musical key tone can be kept constant even the platter speed is changed with the slider.
Stopping or interruption playback
1Stopping or interruption playback. Raise the tone arm off the record. 2Hold the head shell�s finger support and move the tone arm back onto the arm rest. 3Secure the tone arm on the arm rest. 4Press the START/STOP button. The platter stops turning.
5
|
|
|
> |
|
