|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
El producto satisface las necesidades del servicio t
;
This is a good quality scan of the Operation & Maintenance (Service) Manual for the PAL version of this high-band broadcast umatic, BVU-800P
All schematics and lineup procedures appear to be included in this one manual AFAICT.
The file size is just over 113 MB which gives an idea of the quality and number of pages.
All of the schematics, which contain some fairly small print, are easily readable when you zoom into the page.
John Thompson, Newcastle Upon Tyne, England.
;
Good quality, all schematics of few of models. There is also short form of user manual and regulation manual.
;
Perfect copy of the service manual. you can enlarge every page, and it comes up
with all details.
;
It´s very very nice manual with all, what i need. Original in good quality. Very fast business. Very much thanks...
STR-DA2100ES SECTION 4 TEST MODE
TUNER FACTORY PRESET MODE
All preset contents are reset to the default setting. Procedure: 1. While pressing the [MULTI CH IN] and [DISPLAY] buttons, press the I/1 button to turn on the main power. 2. The message �FACTORY PRESET� appears and the present contents are reset to the default values.
SOUND FIELD INITIALIZE MODE
The preset sound field is cleared when this mode is activated. Use this mode before returning the product to clients upon completion of repair. Procedure: 1. While pressing the [2CH] button, press the I/1 button to turn on the main power. 2. The message �S. F. INITIALIZE� appears and initialization is performed.
MEMORY CLEARING MODE
All preset contents are cleared when this mode is activated. Use this mode before returning the product to clients upon completion of repair. Procedure: 1. While pressing the [MUSIC] and [SPEAKERS] buttons, press the I/1 button to turn on the main power. 2. The message �MEMORY CLEARING� appears and the memories are reset to the default values. 3. When done, the message �MEMORY CLEARED� appears.
COMMAND MODE CHANGE MODE
The command mode of the remote-commander which this set receives can be changed. Procedure: 1. While pressing the [INPUT MODE] button, press the I/1 button to turn on the main power. 2. Either the message �C.MODE.AV1� or �C.MODE.AV2� appears. Select the desired mode.
VERSION MODE
When this mode is used, the model, the destination and the software version number are displayed. Procedure: 1. While pressing the [DISPLAY] and [TUNING --] buttons, press the I/1 button to turn on the main power. 2. The model, the destination and the software version number appears.
SF LOCK ON/OFF CHANGE MODE
Procedure: 1. While pressing the [MUSIC] and [MEMORY/ENTER] buttons, press the I/1 button to turn on the main power. 2. Either the message �SF LOCK [OFF]� or �SF LOCK [ON]� appears.
SWAP MODE
Procedure: 1. While pressing the [MAIN MENU] and [PRESET TUNING --] buttons, press the I/1 button to turn on the main power. 2. The message �SWAP MODE � appears. 3. Press the [MEMORY/ENTER] button. 4. The message ��00dB� appears. (Volume level is �MIN�) 5. Press the [MEMORY/ENTER] button once again. 6. The message ��49dB� appears. (Volume level is �MID�) 7. Press the [MEMORY/ENTER] button once again. 8. The message �+13dB� appears. (Volume level is �MAX�) 9. Press the [MEMORY/ENTER] button once again. 10. The message �MUTING� appears. 11. Press the [MEMORY/ENTER] button once again. 12. The message �MUTING OFF� appears.
FLUORESCENT INDICATOR TUBE PATTERN CHECK MODE
All fluorescent segments are tested. When this test is activated, all segments turn on at the same time, then each segment turns on one after another. Procedure: 1. While pressing the [SPEAKER] and [TUNING --] buttons, press the I/1 button to turn on the main power. 2. All segments and [MULTI CHANNEL DECODING] indicator LED turn on.
TUNER AM STEP CHANGE (9 kHz/10 kHz) MODE
Either the 9 kHz step or 10 kHz step can be selected for the AM channel step. Procedure: 1. Press the I/1 button to turn on the main power. 2. Turn the [INPUT SELECTOR] dial to select the �AM� 3. Press the I/1 button to turn off the main power. 4. While pressing the [PRESET TUNING +] or [TUNING +] button, press the I/1 button to turn on the main power. 5. Either the message �9 K STEP� or �10 K STEP� appears. Select the desired step.
10
|
|
|
> |
|
