Very good reproduction (copy) of original manual. Didn't have a parts list, but schematic was completely labeled with parts. Complete instructions on how to adjust mechanical functions of the 8-track deck. Well worth having and at a very reasonable cost.
It's a full manual. All the parts are in there. I haven't found the problem yett, but I am working on it; hope I can rebuild the part myself. To make it more secure and unbreakable this time. Because the part has failed several times before and costs a lot to let it be repaired.
Thanks so much for this rich illustrated and parted manual.
I downloaded the document. The manual was complete, well scanned and everything was legible. I could zoom in see what I needed to know. There's not much more that you can ask.
It was complete service manual with all needed service informations. Thanks.
Text excerpt from page 12 (click to view)
STR-DA2ES/DB1080 SECTION 5 ELECTRICAL ADJUSTMENT
OSD ADJUSTMENT
Connection
frequency counter VIDEO board CN306 pin 1 or pin 2 + �
Procedure: 1. Short the CN306 pin 4 on the VIDEO board to the GND. 2. Connect a frequency counter to the CN306 pin 2 on the VIDEO board. 3. Press the I/1 button to turn on the main power. 4. Press the [CUSTOMIZE] button. 5. Press the [>] button to display �COLOR SYSTEM�. 6. Turn the JOG DIAL to display �NTSC�. 7. Press the [>] button to display �OSD H.POSITION�. 8. Adjust the CT302 so that the frequency counter reading is 3.57954 MHz. 9. Press the [<] button to display �COLOR SYSTEM�. 10. Turn the JOG DIAL to display �PAL�. 11. Press the [>] button to display �OSD H.POSITION�. 12. Adjust the CT301 so that the frequency counter reading is 4.43361 MHz. 13. Press the I/1 button to turn off the main power. 14. Connect a frequency counter to the CN306 pin 1 on the VIDEO board. 15. Press the I/1 button to turn on the main power. 16. Press the [CUSTOMIZE] button. 17. Press the [>] button to display �OSD V.POSITION�. 18. Adjust the CT303 so that the frequency counter reading is 7.20 MHz.
Note: The steps 5, 6 and 9 to 12 should be performed to the models except for the STR-DA2ES and STR-DB1080: Korean.
Adjustment and Connection Loacation: � VIDEO BOARD (Component Side) �
