|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I was having a hard time finding the problem with this Mackie 1604 unit. I didn't have a schematic. Went looking on the web and found your site and the price was more then reasonable. Ordered it and within the hour had the manual and within 15 minutes had the unit fixed. Best $4.99 I ever spent. Thank you.
Doug
;
This is a service manual in every sense of the word ( French and German versions of the text are included, as well as English..)
There are explanations of the mechanical and electrical functions, plenty of mechanical drawings, and the needed schematics. The quality of the scanning is excellent - all the component values are clearly legible - and very usefully there are pcb component layouts, so you can find a component on the schematic, and then very quicky pinpoint its physical location on the relevant pcb.
I cannot see how I can give this manual any less than the maximum 5 stars! Great value for money, which will pay for itself immediately. Excellent all round!
;
the manual is great and especially hard to find... thanks for the great service and having a hard to find manuel_
;
Please tell us what you think and share your opinions with others. Be sure to focus your comments on the product. You will receive $2.50 of store credit for Your review.
;
hat alles sehr gut geklappt. Das Servicemaual ist gut zu verwenden. Die Pläne und Schrift
ist klar und leserlich. Außerdem preiswert. Grüße an alle Hifi-Bastler
STR-DA3000ES
OSD ADJUSTMENT
Connection
frequency counter VIDEO board TP3501 pin 1 or pin 2 + �
1. Short the TP3501 pin 4 on the VIDEO board to the GND. 2. Connect a frequency counter to the TP3501 pin 2 on the VIDEO board. 3. Press the I/1 button to turn on the main power. 4. Press the [ON SCREEN] button on the remote commander. 5. Turn the [MAIN MENU] jog to display �CUSTOMIZE�. 6. Turn the [MENU] jog to display �COLOR SYSTEM�. 7. Turn the [--/+] jog to display �NTSC�. 8. Adjust the CT3502 (except AEP model) or CT3503 (AEP model) so that the frequency counter reading is 3.579545±0.05 MHz. 9. Turn the [MENU] jog to display �COLOR SYSTEM�. 10. Turn the [--/+] jog to display �PAL�. 11. Press the [ON SCREEN] button on the remote commander. 12. Adjust the CT3504 so that the frequency counter reading is 4.433618±0.05 MHz. 13. Press the I/1 button to turn off the main power. 14. Connect a frequency counter to the CN3501 pin 1 on the VIDEO board. 15. Press the I/1 button to turn on the main power. 16. Press the [ON SCREEN] button on the remote commander. 17. Adjust the CT3501 so that the frequency counter reading is 7.20±0.01 MHz.
Note: The steps 5 to 7 and 9 to 12 should be performed to AEP model.
Adjustment and Connection Location: � VIDEO BOARD (Component Side) �
CT3503 (AEP model)
TP3501 1 4 CT3501
CT3504 (AEP model)
CT3502 (except AEP model)
17
|
|
|
> |
|
