|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Incredibly clear!!!! Well done, complete and wonderful. It could not better than this!!!!
 ;
Thank You for fast delivery for the sheme.
Everything allright.
Thanks & best regards Franz
;
again you did a very good job. It was fast too. Photocopy are really readable and clear
;
Probably it never existed a 1081 official service manual from Commodore, it's look more like a NAPCEC service manual & diagrams compilation of the 1084 series and his variants, like the nap6523, 8cm505, 1084S, 1084P and obviously the 1081. It's more complete than other scans and the quality of the scans also are far superior. It has two circuit diagrams variants of the 1081, mono and stereo versions. It doesn't include a diagram for the Philips CM8500 or CM8501, they look like the 1081 but they are slightly different.
;
Rapid, clear well done as all the scheme I downloaded from this site. Great job very functional and very useful
STR-DB795 SECTION 4 TEST MODE
TUNER FACTORY PRESET MODE
All preset contents are reset to the default setting. Procedure: 1. While pressing the [MUSIC] and [PRESET TUNING --] buttons, press the I/1 button to turn on the main power. 2. The message �FACTORY� appears and the present contents are reset to the default values.
SWAP ALL MODE
Procedure: 1. While pressing the [PRESET TUNING +] and [A.F.D.] buttons, press the I/1 button to turn on the main power. 2. The message �SWAP� appears.
COMMAND MODE CHANGE MODE
The command mode of the remote-commander which this set receives can be changed. Procedure: 1. While pressing the [INPUT MODE] buttons, press the I/1 button to turn the main power. 2. Either the message �C.MODE.AV1� or �C.MODE.AV2� appears. Select the desired mode.
TUNER AM STEP CHANGE (9 kHz/10 kHz) MODE
Either the 9 kHz step or 10 kHz step can be selected for the AM channel step. Procedure: 1. Press the I/1 button to turn on the main power. 2. Turn the [INPUT SELECTOR] dial to select the �AM� 3. Press the I/1 button to turn off the main power. 4. While pressing the [PRESET TUNING +] or [TUNING +] button, press the I/1 button to turn on the main power. 5. Either the message �9 K STEP� or �10 K STEP� appears. Select the desired step.
VERSION CHECK MODE
The version of the micro computer displayed. Procedure: 1. While pressing the [PRESET TUNING --] and [2CH] buttons, press the I/1 button to turn the main power. 2. The version of the micro computer and model destination are displayed.
TUNER AUTOBETICAL TUNING MODE (AEP and UK models)
Procedure: 1. While pressing the [MEMORY/ENTER] button, press the I/1 button to turn on the main power. 2. The message �AUTO-BETICAL SELECT� appears and scans and stores all the FM and FM RDS stations in the broadcast area. 3. When done, the message �FINISH� appears.
DECODE AUTO ALL MODE
Procedure: 1. While pressing the [PRESET TUNING --] and [MOVIE] buttons, press the I/1 button to turn the main power. 2. The message �DEC TEST� appears.
PROTECTOR AUTO OFF SOUND FIELD CLEAR MODE
The preset sound field is cleared when this mode is activated. Use this mode before returning the product to clients upon completion of repair. Procedure: 1. While pressing the [2CH] button, press the I/1 button to turn on the main power. 2. The message �SF. CLR.� appears and initialization is performed. When this mode is used, a protector on state is maintainable. Procedure: 1. While pressing the [PRESET TUNING +] and [MOVIE] buttons, press the I/1 button to turn on the main power. 2. The message �PROT EVER� appears.
FLUORESCENT INDICATOR TUBE PATTERN CHECK MODE
All fluorescent segments are tested. When this test is activated, all segments turn on at the same time, then each segment turns on one after another. Procedure: 1. While pressing the [PRESET TUNING --] and [A.F.D.] buttons, press the I/1 button to turn on the main power. 2. All segments and [MULTI CHANNEL DECODING] indicator LED turn on.
SHIPMENT MODE
All preset contents are cleared when this mode is activated. Use this mode before returning the product to clients upon completion of repair. Procedure: 1. While pressing the [PRESET TUNING --] and [SURR BACK DECODING] buttons, press the I/1 button to turn ton the main power. 2. The message �CLEARING� appears and memories are reset to the default values and the main power turn off automatically.
14
|
|
|
> |
|
Home
