|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
A comprehensive Operating and Service Manual. All schematics are complete and easy to read. The PCB drawings and complete parts list are very helpful. I would definitely recommend this manual.
;
SCANNING OF HIGH QUALITY
VERY, VERY HIGH VELOCITY DOWNLOAD
VERY GOOD PRICE,
TRUE SATISFIED, THANKS
;
Genuine Toshiba owner's manual. Couldn't really ask for more. And written in understandable English in contrast to a few recent experiences I have had with manuals for other equipment other than Toshiba but made in China and written in "Chinglish"!
;
I purchased a vintage Sony mixer off eBay and within the hour was able to locate and purchase the manual for it.I mean really,where else can you find a manual for a product made in 1983!? It was easy to find and purchase/download the manual I needed.I will use this site again for other equipment I have! Great site!
;
manual de usuario perfecto y completo de buena calidad de impresion y muy detallado ideal !
Performing initial setup operations
Once you have hooked up the speakers and turned on the power, clear the receiver�s memory. Then specify the speaker parameters (size, position, etc.) and perform any other initial setup operations necessary for your system.
Tip
Performing initial setup operations
Before using your receiver for the first time, adjust SET UP parameters so that the receiver correspond to your system. For the adjustable parameters, see the table on page 66. See pages 20�25 for speaker settings.
Multi channel surround setup
For the best possible surround sound, all speakers should be the same distance from the listening position (A). However, the receiver lets you to place the center speaker up to 1.5 meters (5 feet) closer (B), the surround speakers up to 4.5 meters (15 feet) closer (C) and the surround back speakers up to 4.5 meters (15 feet) closer (D) to the listening position. The front speakers can be placed from 1.0 to 12.0 meters (3 to 40 feet) from the listening position (A). You can place the surround speakers either behind you or to the side, depending on the shape of your room (etc.).
continued
To check the audio output during settings (to set up while outputting the sound), check the connection (page 25).
Clearing the receiver�s memory
Before using your receiver for the first time, or when you want to clear the receiver�s memory, do the following.
1 Turn off the receiver. 2 Hold down ?/1 for 5 seconds.
�MEMORY CLEARING�, then �MEMORY CLEARED� appears in the display and all of the following items are reset or cleared: � All preset stations are reset or cleared. � All sound field parameters are reset to their factory settings. � All index names (of preset stations and program sources) are cleared. � All SET UP and CUSTOMIZE parameters are reset to their factory settings. � The sound field memorized for each program source and preset stations are cleared. � The master volume is set to VOLUME MIN.
19US
Hooking Up and Setting Up the Speaker System
|
|
|
> |
|
