|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Thanks so much for the Owner's manual for my Sony PS - FL1. I had purchased the turntable off of eBay. It came in and looked great. Packed well and appeared to be great. I balanced and aligned the tone are and hooked it up. When trying to play a record the tone are would move to the right place and just before it would drop to play it moved back off the edge of the record before touching down. I searched the net for an answer to this issue. No luck. Then I purchased the owners manual and sure enough there was a place to adjust where the stylus touched down. That adjustment solved the problem and saved me a $35 feet to have the player checked out. The manual is well written and easy to understand. It is a must have for anyone with this front loading Sony turntable.
 ;
Some years back I pruchased a Sansui G-9000. I had it cleaned up and a problem with the left channel repaired. When I got it back I hooked it up to my tape decks, turn tables, TV and it played great. The only thing I was not really satisfied with was the performance of my Graphic Equalizer. I purchased this owner's manual had poured myself a cup of coffee. The manual is well organized and written in plain language. It also contained the solution to my dissatisfaction. By using the preamp connections coupled I was able to run everything through my graphic equalizer and now enjoy the full potential of my complete system.
 ;
An excellent service for the price, however, it would also have been handy if the troubleshooter pages were included. The manual is only sent in the language of your country, thus it looks as though there are some pages missing. Otherwise highly recommended.
 ;
I am happy to get a rare TECHNICS SH-9090 Owner's Manual by PDF in clear copy.
 ;
Hr, klasse , good manual, verry fast on my e-mail, very usefull manual. rgds; ahm zeegers
5: Setting up the speakers
You can use the SET UP menu to set the size, distance and location of the speakers connected to this receiver.
x SUB WOOFER XXX (Sub woofer selection)
� YES If you connect a sub woofer, select �YES�. � NO If you did not connect a sub woofer, select �NO�. The front speakers are automatically set to �LARGE� and you cannot change this setting. This activates the bass redirection circuitry and outputs the LFE signals from other speakers. � In order to take full advantage of the Dolby Digital bass redirection circuitry, we recommend that you set the cut off frequency on the sub woofer as high as possible.
x FRONT SP XXXXX (Front speakers size)
1 2 3
Press ?/1 to turn on the receiver. Press MAIN MENU repeatedly to select � SET UP �. Turn MENU to select the parameter you want to adjust.
For details, see �Speaker setup parameters� below.
Note
Some speaker setup items may appear dimmed in the display. This means that they have been adjusted automatically due to other speaker settings or may not be adjustable.
� LARGE If you connect large speakers that will effectively reproduce bass frequencies, select �LARGE�. Normally, select �LARGE�. � SMALL If the sound is distorted, or you feel a lack of surround effects when using multi channel surround sound, select �SMALL� to activate the bass redirection circuitry and output the front channel bass frequencies from the sub woofer. When the front speakers are set to �SMALL�, the center, surround and surround back speakers are also automatically set to �SMALL� (unless previously set to �NO�).
x CTR SP XXXXX (Center speaker size)
4 5
Turn �/+ to select the setting you want.
The setting is entered automatically.
Repeat steps 3 and 4 until you have set all of the items that follow.
Speaker setup parameters
The initial settings are underlined.
x EASY SETUP XXX (Speaker easy setup)
� YES
If you want to set up your speakers automatically, select �YES�. You can select a pre-defined speaker pattern (see the supplied �Easy Setup Guide�). � NO If you want to adjust the settings of each speaker manually, select �NO�.
x SP PATTERN X�X (Speaker setup pattern)
� LARGE If you connect a large speaker that will effectively reproduce bass frequencies, select �LARGE�. Normally, select �LARGE�. However, if the front speakers are set to �SMALL�, you cannot set the center speaker to �LARGE�. � SMALL If the sound is distorted, or you feel a lack of surround effects when using multi channel surround sound, select �SMALL� to activate the bass redirection circuitry and output the center channel bass frequencies from the front speakers (if set to �LARGE�) or sub woofer.a)
When �EASY SETUP� is set to �YES�, select the speaker setup pattern. Turn �/+ to select the speaker setup pattern and press ENTER to enter the selection. Check your speaker pattern using the supplied �Easy Setup Guide�.
18US
|
|
 |
> |
|