There are currently no product reviews.

;
It is perfect, exactly what we needed. It's like the paper version but less clutter.

;
Received my manual within 24 hours. Very clear scan of the manual I needed. Thanks!

;
Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.

;
Immediate response with excellent service - highly reccommended

;
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
Automatic Playback Features 41
Automatic Playback
When you put a tape in the VCR, the power will come on automatically. If the tape�s record tab is missing, playback will begin. (If a timer recording is set, you may have to press the POWER button to turn on the VCR. Make sure you turn off the VCR for the timer recording later. If you insert a tape without a record tab when a timer recording is set, the VCR will eject the tape.)
Automatic Rewind, Eject, Off
When a tape is played, fast forwarded, or recorded to its end, the VCR will rewind the tape to the beginning, eject the tape, and turn itself off. If the real-time counter memory is set, the VCR will only rewind the tape to the point at which the counter is set to zero, then stop. The VCR will not eject the tape or shut itself off.
Tape Eject
A tape can be ejected with the VCR power on or off (but the VCR must be plugged in). If a Timer Recording is programmed, a tape can only be ejected with the power on. Be sure to insert a tape for the Timer Recording, then turn off the VCR power.
Automatic Tracking Adjustment
The VCR automatically adjusts tracking to give you the best possible picture quality. With some recordings, however, you may get a better picture using the manual tracking controls (see below).
Manual Tracking
To adjust the tracking manually, press the CHANNEL o/p buttons on the VCR during playback. NOTES: � Tracking is returned to automatic tracking adjustment when a tape is inserted or when the STOP button is pressed to halt playback. � Automatic tracking adjustment will not work during slow motion playback. Instead, use the CHANNEL o/p buttons on the VCR or on the remote control to reduce noise lines in slow motion playback. � Manual tracking will not operate when the VCR is in Still mode. � Use the CHANNEL o/p buttons on the VCR or on the remote control to remove vertical jitter in a Still picture.
Before Tracking Adjustment
After Tracking Adjustment