|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Product was very good. Received quickly and complete
 ;
Although printing quality is not the best, the manual was very helpful in order to reactivate this ancient but still good electronic musical instrument.
;
as a first-time user and buyer from this site, i found the overall service outstanding!! this product is a godsend as, without it, i would never have been able to find my way around and use my machine as intended. i will certainly use this site again as required. many many thanx!!
;
This manual is exactly what I needed. This site always has every manual I need, and it is also much less expensive then most other sites. This is the only manual site I will use.
;
Useful manual, good scan, worth the pay if you find the unit difficult to operate.
two. Hookup
Connection Tips
Wire Length Up to 20 ft. Up to 30 ft. Greater than 30 ft. Recommended Speaker Cable Size 16 gauge 14 gauge 12 gauge or heavier
Preparing the Speaker Cable
1. Determine the length of wire necessary to connect your amplifier to the speaker that is farthest away. Remember to allow for extra cable to be able to conceal it under baseboards, or run it around corners. 2. Keep both cable lengths the same in order to help maintain proper signal balance and imaging. 3. Separate about one inch of the two conductors that make up each cable. Then strip off about 3/8" of insulation. 4. Twist each conductor�s thin wires into a tightly bunched spiral. 5. Identify a difference between the two conductors. This may be done in various ways, depending upon the type and brand of cable you are using.
Some of the More Common Differentiating Marks for Conductors Are:
� Different color wire � A strand of thread in one � A colored line on one con-
ductor�s outer insulation
� Raised ribs on one conduc-
conductor
tor�s outer insulation � A printed (+) marking on one of the insulators
The terminals on the SVA Series loudspeakers can accept several types of speaker cable connections. Remember to connect the red (+) terminal on the receiver/amplifier to the red (+) terminal on the speaker and the black (�) terminal on the receiver/amplifier to the black (�) terminal on the speaker.
�
HF
+
�
HF
+
High Frequency +2dB 0dB
High Frequency +2dB 0dB
�
LF
+
�
LF
+
Bare wire connecting method.
Banana/spade connecting method.
 $4.99 SVA2100 JBL
Service Manual Complete service manual in digital format (PDF File). Service manuals usually contains circuit diagr…
|
|
|
> |
|
