|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
have download a number of manuals todate , most are excellant, one or two sometimes a little difficult to read but a least avaialable, great site .
Brad.
;
Excellent had everything I wanted, very happy with purchase
 ;
This service is relatively cheap, document is fast available, schematic is readable.
Thanks.
;
So far I´m a satisfied customer. I have only downloaded "TECHNICS SX-KN470 Service Manual" maybe I will use it later.
Best regards
Peter
;
Good manual. It is complete and of high quality, both text and graphics. The schematics are with the original big size, so it can be viewed or printed without any loss of resulution and sharpness.
Alignment and Adjustment
5-3 Electrical Adjustment
5-3-1 Head S/W Adjustment
Note : Only remote control ass�y can adjust. 2. When using the �TEST� button of remote control ass�y ; 1) Insert an SP tape into the housing ass�y. 2) Press the �PLAY� button. 3) Press the �TEST� button and �SPEED� button simultaneously. 4) This will adjust the head S/W point adjustment automatically. 5) After adjustment is completed, press the �POWER� button to release.
5-3-1 (a) IF REMOTE CONTROL ASS�Y (AC93-10039Y/69099-633-252) IS AVAILABLE
1. When using the �INPUT� button of remote control ass�y ; 1) Insert an SP tape into the housing ass�y. 2) Press the �PLAY� button. 3) Press the �INPUT� button and �3� button simultaneously. 4) This will adjust the head S/W point adjustment automatically. 5) After the adjustment is completed, press �POWER� button to release. 2. When using the �TEST� button of remote control ass�y ; 1) Insert an SP tape into the housing ass�y. 2) Press the �PLAY� button. 3) Press the �TEST� button and �SP/LP� button simultaneously. 4) This will adjust the head S/W point adjustment automatically. 5) After adjustment is completed, press the �POWER� button to release.
5-3-1 (b) IF NORMAL REMOTE CONTROL ASS�Y FOR X-7/X-8(DX7-R/DX7-RC/ DX8-R/DX8-RC) CHASSIS IS AVAILABLE
1. When using the �INPUT� button of remote control ass�y ; 1) Insert an SP tape into the housing ass�y. 2) Press the �PLAY� button. 3) Press the �INPUT� button and �3� button simultaneously. 4) This will adjust the head S/W point adjustment automatically. 5) After the adjustment is completed, press �POWER� button to release.
Samsung Electronics
5-5
|
|
|
> |
|
