|
There are currently no product reviews.
 ;
Good quality. Quick service. I recommend to everyone.
 ;
Very good quality scan of the document. I am very pleased with what I got.
 ;
PDF Contains
Technical Data, Mechanical data, Detailed Circuit diagram with components value, PCB layout. Actual PCBs Print. Component List, Spare parts code list and Input output detail. It cover LBB1211, LBB1212, LBB1213, LBB1216, LBB1217.
It is the actual Service Manual for SQ10
 ;
very good manual with clear electrical schemes. Very helpful to find wat was wrong inside my microwave.
 ;
Hi, thankyou for providing the Nordmende Globetrotter original manufacturer's repair manual. Quality is very good and sharp - the PDF file was comfortably small to download. The only question is: why did it take so long to become ready for download?? Many thanks anyway, I fixed the fault in the radio thanks to the circuit.
regards: Nick
1
2
3
4
8. PANEL FACILITIES
7 1 2 3 4 5 6
A
B
1 Power switch (POWER)
When pressed, power is turned ON; when pressed again, power is turned OFF.
2 Power Indicator
Illuminates when the power is on.
3 VOLUME knob
Sets the subwoofer volume. ÷ Turn the knob slowly from the MIN position. ÷ With this unit, the bass level can be independently set, so do not turn up the bass on the stereo amplifier.
C
4 CROSSOVER FREQUENCY knob
Sets the high limit of the frequency played back by the subwoofer. ÷ Setting Criteria 50Hz ....... when the diameter of the left/right speakers is 20 cm or more. 100 Hz .... when the diameter of the left/right speakers is 10 cm to 25 cm. 200 Hz .... when the diameter of the left/right speakers is 12 cm or less.
D
5 Phase switch (PHASE � 0� / _ 180�)
When depressed (_ 180�), the output phase becomes the reverse of the input signal, and when raised ( � 0� ), it is in the same phase as the input signal. ÷ Normally, the switch is set to ( � 0� ). But when the sound connection between the subwoofer and the left and right speakers sounds unnatural, try switching to 180� and set the switch in the position where the sound is natural.
6 CROSSOVER FILTER / DIRECT switch
When set to DIRECT, the audio signal is routed directly to the woofer unit, by passing the amplifer's filter.
E
7 Line Level Input terminal (LINE LEVEL INPUT)
Connects to the amplifier�s (or receiver's) SUBWOOFER PREOUT terminal, with the specially provided RCA plug cord.
F
S-W160S-K
1 2 3 4
19
|