|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Complete service and operation manual. All schematics are there, all circuit boards AND add-on boards. Including exploded views ,component names and specifications. Also electrical and mechanical adjustment procedures are in this manual. This manual also covers the more advanced BR-S811E unit. Scan quality is fair and usable.
 ;
High quality scan of original Service Manual. Everything´s fine!
;
Good scan of the original service manual. All schematics and adjustment procedures are there. It helped me to fix a long lasting problem with the tracking circuitry. The manual also includes the supplementals 1,2 and 3. Included are; electrical schematic's , pcb layout's, mechanical drawing's and exploded views, disassembly manual and maintenance procedures. 236 pages.
;
The Service Manual received was helpful. The electronic information is exactly what I needed.
I recomend all of my friends about this technical page.
;
High quality scan of service manual. I am satisfied!
No LASER DIODE ON
Is the connector inserted normally into the CN100 ? Y Isn�t there any problem with the FPC Wire ? Y When the SLED is moved to the inner cycle, is electricity of about 1.2V output from the12pin of IC301 ? Y Is electricity of about 0.5V input through 77pin of IC100 ? Y Is electricity of about 0.5V output through 77pin of IC100 ? Y
N
Try again after a normal insertion of the connector into CN100.
N
Try again after replace of FPC Wire.
N
If the pattern of IC300 and sodering is normal when you checked, replace IC300.
N
If the time transfer R148, R153, R142 and soldering are ok is when you check.
N
If the pattern of IC100 and sodering is normal when you checked, replace IC100.
Replace PICK -UP.
The value of voltage(1.2V, 0.5V) can be modified slightly, depending on the result of power calibration or the media.
13
|
|
|
> |
|
