|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
 ;
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
;
good scans, all is clear. all pages in order. recommended
;
Très-très bon site, facile, très bon prix.
Au futur besoin, je n’hésiterais à faire appel à vous.
Merci
A
Press �3� key, check NG whether deviation of the TX data is app. 450kHz Dev.
Check whether there is a NG pulse data waveform at C630. OK Check handset RF unit.
Check whether there is NG a pulse data waveform at pin 40 of IC602. OK Check R654, R656, R701, C631 and C630.
Check IC602 and its periperal circuit.
OK Press �5� key, 914.880 NG MHz (400kHz~500kHz Dev.) 1mV output signal from RF jack is applied. Check whether the bell ring. OK Place the handset on the base to charge about 10 seconds, then connect again. Check whether there is NG the 450kHz waveform at C605. OK Check handset RF unit .
Check whether there is a NG 450kHz pulse waveform at pin 35 of IC602. OK
Check R620, R623, R697, C605, C631.
C h e ck w h e t h e r t h e NG voltage at R693 is more than 1V. OK Check R693.
Check handset RF unit.
16
|
|
|
> |
|
