|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
PHILIPS PE1642 Owner's Manual
Hi,
you have complet fullfilled my expectance.
Price is OK.
Robert Schmid
 ;
Came in the mail within a few hours. Gave clear instruktion on maintaines. Is of great use to have this manual in house
;
Easy to access. Clear instructions. No problems. Printed fine.
;
Great scan but please note that it is entirely in GERMAN.
;
High quality scan of the manual, very quick and easy download and very important, a truly honest price. thanks
Listening to the radio
06
Chapter 6
Listening to the radio
Listening to the radio
The tuner can receive both FM and AM broadcasts, and lets you memorize your favorite stations so you don�t have to manually tune in every time you want to listen.
DVD/DVR1 DVD/DVR2 DIGITAL ANALOG
3 Use the / (cursor up/down) buttons to select FM MONO then press ENTER. The mono indicator ( ) lights when the tuner is in mono reception mode.
Select FM AUTO above to switch back to auto-stereo mode (the stereo indicator ( ) lights when receiving a stereo broadcast).
FM/AM
Improving poor AM sound
The simplest way to improve the sound quality of AM radio is to make sure that the TV in the room is switched off. Also try changing the position and direction of the AM loop antenna.
SLEEP
ENTER
SETUP
CLEAR
SR
TUNE ST ST
Changing the noise cut mode
TEST TONE
ENTER
SOUND TUNE
SOUND RETRIEVER
If you find that the sound quality is bad even after trying the above, you may be able to improve it using a different noise cut mode. Just choose the one that sounds best.
1 1 Press FM/AM to switch to the tuner, then press repeatedly to select the FM or AM band. The display shows the band and frequency. 2 Tune to a frequency. There are three tuning modes � manual, auto, and highspeed:
� Manual tuning � Press TUNE +/� repeatedly to change the displayed frequency. � Auto tuning � Press and hold TUNE +/� until the frequency display starts to move, then release. The tuner will stop on the next station it finds. Repeat to keep searching. � High-speed tuning � Press and hold TUNE +/� until the frequency display starts to move rapidly. Keep the button held down until you reach the frequency you want. If necessary, fine tune the frequency using the manual tuning method.
Tune to an AM radio station then press SETUP.
2 Use the / (cursor left/right) buttons to choose NOISECUT then press ENTER. 3 Use the / (cursor up/down) buttons to select a Noise cut mode (1, 2 or 3) then press ENTER.
Memorizing stations
You can save up to 30 station presets so that you always have easy access to your favorite stations without having to tune in manually each time. 1 Tune to an FM or AM radio station. Select mono or auto-stereo reception (FM) or the Noise Cut mode (AM) as necessary. These settings are saved along with the preset.
English
2
Press SETUP.
3 Use the / (cursor left/right) buttons to choose ST.MEM. then press ENTER. 4 Use the / (cursor up/down) buttons to select the station preset you want then press ENTER.
Improving poor FM reception
If you�re listening to an FM station in stereo but the reception is weak, you can improve the sound quality by switching to mono.
Listening to station presets
1 2 Make sure the tuner function is selected. Use the ST +/� buttons to select a station preset. � Alternatively, use the number buttons to select a preset directly.
1
Tune to an FM radio station then press SETUP.
2 Use the / (cursor left/right) buttons to choose FM MODE then press ENTER.
19
En
|
|
|
> |
|
