Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
Text excerpt from page 1 (click to view)
INSTRUCTIONS BOOK
WASHING MACHINE T 632
1. TECHNICAL CARACTERISTICS
DIMENSIONS Height Width Depth 850 mm 397 mm 600 mm 230 V / 50 Hz 2300 W Minimum Maximum 0,05 MPa (0,5 bar) 0,8 MPa (8 bars) Type 20x27
VOLTAGE / FREQUENCY TOTAL POWER WATER PRESSURE Connection to the water network
This washing machine complies with CEE directive 89-336 about the limitation of radioelectric disturbances and directive CEE 73-23 for electrical safety.
2. WARNINGS
Keep this user�s manual with your washing machine. If you sell your washing machine or give it away, make sure that it is accompanied by its user�s manual. The new user can then be informed of how the washing machine operates and read relevant warnings. These warnings have been written for your safety and for the safety of others. Please read these comments carefully before installing and using your washing machine. Thank you for your attention.
� When you receive your washing machine, unpack it or have it unpacked immediately. Check its general appearance. Make any reserves in writing on the delivery form and keep a copy. Your washing machine was designed for use by adults. Make sure that children do not touch it or use it as a toy. Do not modify or attempt to modify the characteristics of this washing machine. This could be dangerous for you. Your washing machine is intended for normal domestic use. Do not use it for commercial or industrial purposes of for any purpose other than that for which it was designed : to wash, to rince and to spin. Unplug the power suplly plug and close the water supply tap every time after using your washing machine. Only wash articles that can resist machine washing. Refer to the instructions on the label for each article. Do not wash underwear with bones, or any material without hems, or torn materials in your washing machine. Remember to remove all coins, safety pins, boraches, screws, etc., before each wash. They can cause serious damage if they are left in your washing. Do not put articles in your washing machine if you have used a solvent, alcohol, trichloroethylene, etc., to remove stains from them. If you must use these stain removers, wait until the product has evaporated before putting the articles in the drum. Collect all small articles such as socks, belts, etc., in a small cloth bag or pillow case. Use the quantity of detergent indicated in the «proportioning of detergents» section. Always unplug the washing machine before cleaning it and doing any maintenance. � � This washing machine is heavy. Take care when moving it. You must remove the packing on the washing machine before use. Failure to remove all transport protection devices can cause damage to the washing machine or nearby furniture. The washing machine must be unplugged while packing is being removed. Do not allow any one other than a qualified plumber to make the hydraulic connections necessary to install your washing machine. The washing machine must be plugged in to a power outlet with a conform earth. Call a qualified electrician if the electrical installation in your residence is such that you have to modify it before you can connect your washing machine. Please read the instructions in the "electrical connections" chapter carefully before connecting your washing machine. After installing your washing machine, make sure that it is not standing on its electrical power supply cable. When your machine is installed on a carpeted floor, make sure that the carpet does not close off the ventilation openings near the bottom of the machine. The power supply cable may be only replaced by the After Sales Service. Your manufacturer cannot be held responsible for any damage resulting from a nonconform installation.
