This is an excellent handbook. We had no information on the appliance until we obtained this and are now able to use the appliance to its full potential. Strongly recommended.
The Owner's manual was very helpful. The WEGA is about 35 years old and needed repair.
Your Website is pretty good und easily to handle.
Thank You
Carl-W. Lohmann
Text excerpt from page 4 (click to view)
4.2.8. End of the programme
When the chosen programme is over, the washing machine stops automatically and the programme selector stays on the stop « » or «rinse hold » position. The programmes end : � by a spinning or a draining (for all the washing programmes) by selecting the wanted position on the spinning speed variator (if you have not pressed the «rinse hold» pushbutton). � by a rinse hold (for all the washing programmes) if you have selected the «rinse hold » pushbutton. You can finish these programmes by a spinning by selecting the wanted position on the spinning speed variator and releasing the «rinse hold » pushbutton.
At the end of the cycle, allow the On/Off « » pushbutton to come out to switch the washing machine off. Release any other pushbuttons that are pressed in. Pull out the electricity plug and close the water supply tap. Note: we recommend that you should leave the cover and the drum open after use to air the washing drum.
