|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I needed the manual immediately and I got it immediately. I couldn't find this manual anywhere else on the net. The site was easy to traverse, and the price was very reasonable. I'll definitely be back for any future needs.
 ;
I received a good service manual, with good resolution. Improve the instructions for the purchase because they are not well understood.
For the rest, so good.
Thanks Angel.
;
Very good documentation for the Grundig 2077 model (as well as similar 800/900/1000 series radios). The first two pages are a summary of reception specifications and output capability. The third page is the tuner dial indicator and dial cord routing diagram. the final ~5 pages are the schematics for the various models (including 2077). The scan quality of the schematics are good, adn can be easily read if zoomed in. The documents are in German, not English as stated. It would have been nice to have the tuning sequence and settings, and some trouble shooting materials... or component and wiring map.
;
Perfect like it was descriped, Perfect like it was descriped
;
Very good detail, all pages clear, exactly what I needed
SECTION 1 SERVICE NOTE
The TCS-60DV detects rotation of both the supply and take-up side reels using the PH701 (photo reflector). Because the PH701 is mounted on the Main board, auto stop is activated and reel rotation cannot be detected when the Main board is removed. To check the operation of mechanism deck and voltage without the Main board, follow the procedure as described below. How to remove the Main board (opening the Main board) 1) Refer to page 5 �3. Disassembly�. How to enter the fast forward/rewind modes 1) Input the square wave to the TP41. (Refer to the illustration below.) 2) Press the fast forward/rewind keys. 3) Turn on the S301. How to enter the playback mode 1) Input the square wave to the TP41. (Refer to the illustration below.) 2) Press the playback key. 3) Set the S302 to the PLAY. 4) Turn on the S301. How to enter the record mode 1) Input the square wave to the TP41. (Refer to the illustration below.) 2) Press the record key. 3) Set the S302 to the REC. 4) Turn on the S301.
(Side A) PULSE 10Hz 1.6V (4.5dB) TP1 Oscillator TP41
(Side B)
(Side A)
S301
S302
�3�
|
|
|
> |
|
