|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
manual de usuario perfecto y completo de buena calidad de impresion y muy detallado ideal !
 ;
It`s full copy of a service manual from url http://www.philips.owner-manuals.com/PM3216-service-manual-PHILIPS.html
;
perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
;
Well Well Well!!!! Good manual perfect for my hobby!!! As Before you have done a very well done work!!!! Thank you
;
Super nice! Good to have a manual in digital format.
Chapter 2. Drum Instrument Settings [INST]
Here�s how to select and edit sounds, such as the snare drum and kick drum.
Lock the Pad You are Editing (TRIG LOCK) [SHIFT] + [RIM]
When editing instruments, you can prevent the screen from being switched inadvertently even if you hit another pad.
Choosing a Pad to Edit
There are two basic ways to select the sound you want to edit.
1. Select the pad to be locked. 2. Hold down [SHIFT] and press [RIM] to make it flash.
The pad is locked and other pads cannot be selected.
Chapter 2 [INST]
Choose by Hitting a Pad
1. Press [INST].
fig.02-001_70
The settings screen for the pad appears.
[INST] lights, and the �INST� screen appears.
3. To release the lock, hold down [SHIFT] and press [RIM] to make it stop flashing.
* You can change the pad to be locked by using buttons even if the [RIM] is flashing.
2. Strike a pad.
The settings screen for the struck pad appears. To select a pad�s rim, strike the rim.
Assign an Instrument to a Pad
All the TD-12 sounds are referred to as instruments (INST).
fig.02-001_70
Choose with the Buttons
1. Press [INST].
[INST] lights, and the �INST� screen appears.
2. Hold down [SHIFT] and press [CURSOR (left/ right)] to select the trigger input number.
The trigger input number is indicated in the upper part of the screen.
1. Press [INST].
[INST] lights, and the �INST� screen appears. �Group�: Type of instrument (Inst Group) �Inst�: Name of instrument (Inst Name)
3. Press [RIM] to select the head or rim.
Head: Rim:
fig.02-002_70
[RIM] is unlit. [RIM] is lit.
2. Strike a pad.
The settings screen for the struck pad appears.
3. Press [CURSOR (up/down)] to move the cursor to �Group� or �Inst.� 4. Use [+/-] or [VALUE] to select the Inst group/ instrument.
When MIDI Note Number (p. 38) corresponding to a pad is received, the pad is selected and shown in the screen.
5. Press [EXIT] to return to the �DRUM KIT� screen.
Pressing [F5 (H & R)], you can choose to set the head and rim simultaneously or individually. When you select the head and rim simultaneously, the rim�s instrument number is one bigger than head.
33
|
|
|
> |
|
