|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
It was a complete manual as stated. Very good source for older product manuals. Thanks
;
Scan quality is very good. Price is very reasonable. If you're looking to purchase a copy of this manual, this is the one to get.
 ;
Perfect for my use.Could have better pictures,but otherwise perfect ;)
;
This is one of four manuals I have downloaded recently.
Purchase was very straight forward and the authorising email arrived in about 4 hours.
The quality of the scan is good. Print is clear and square to the page edges.
;
Exactly as advertized. High quality digital copy of the Nak 610 user manual. Easy download and access. Highly recommended.
Connect your TDA-700
Volume settings when using V-Drums sound module
For best possible sound quality, set the volume of the V-Drums sound module and TDA-700 as follows.
1.
When PHONES on the V-Drums sound generator is connected to the TDA-700�s V-DRUMS IN , set the VDrums generator�s PHONES VOLUME to the center position.
� V-Drums PHONES connection
When the V-Drums sound generator�s MASTER OUTPUT is connected to the TDA-700�s CH 1 INPUT , set the V-Drums MASTER VOLUME to the maximum position.
� V-Drums MASTER connection
2. Set the TDA-700 CH1 VOLUME to the center �5� position.
3. Adjust the TDA-700�s MASTER VOLUME to determine the overall volume level. * If the POWER INJECTION indicator turns red quite often, lower MASTER VOLUME until it turns red only occasionally. * If other sound sources are connected to CH 2, CH 3, adjust the CH2, CH3 VOLUME also.
4. Adjust the tone to your liking using the V-DRUMS SHAPE Switch and the EQUALIZER. * If you hear distortion after the adjustment, lower the CH1 VOLUME or V-Drums VOLUME until the distortion is gone. * Above also applies to cases with other sound sources connected to CH2, CH3. In that case, lower the CH2, CH3 VOLUME or VOLUME at the sound source.
12
|
|
|
> |
|
