|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Quick site processing. A complete and very useful manual with all details. Thank you!
;
Quick service response. A useful and very rare service manual with all details. I recomend this service.
;
I ordered this manual sometime in the afternoon and I received it on my e-mail the same evening.
This is a fantastically good and properly scanned copy of the original manual. All pages are of the same scale and they overlap each other. It means that you can print the manual and easily make it as a convenient paper manual.
The content of the manual is fantastic. Alignment descriptions, PCB layouts and elementary diagrams are explicit and precise. I immediately found what I was looking for. Thanks to this manual and Owner-Manuals.com my amplifier is alive again. Many thanx indded!
;
The manual was well-scanned and easy to read. As an added bonus, the Operator's Manual was bundled with the Service Manual!
I'd definitely use owner-manuals.com again.
;
Finally, i found one website, where i can download this service manual , and fix my hifi. The service manual is very good, and easy to download and to print.
Chapter 4
How to upgrade the firmware of Network
Step 1) Prepare a USB memory. Step 2) Extract and copy an update file to root directory on your USB memory. e.g.) A file which is unzipped is �NK.bin� Step 3) Unplug the power cord and insert the USB memory into the USB slot. Step 4) Press and hold the projector�s [MENU] and [RETURN] keys. Then plug in the power cord and turn on Main power switch. When the projector enters the firmware upgrade mode of Network, the buzzer beeps for 1 sec., [LAMP], [ON/STANDBY] and [TEMP] LED Blinks Red, Orange and Red in order. The firmware upgrade will take about 5 minutes. When it is completed, the state of projector will become standby mode. If projector doesn�t become standby mode, it means the firmware upgrade has failed. You need to try again. Step 5) Make sure of the F/W version. You can find it on the OSD menu of NETWORK input. (Press the NETWORK button and press the MENU button twice. You can see the version in the status display of Setting display (2) menu.) Step 6) Turn the projector off and take USB memory out.
4-15
|
|
|
> |
|
