|
There are currently no product reviews.
 ;
Excellent copies.
I will use "Owner Manual" again a second time.
 ;
Very good manual for Technics SL 303. Manuale molto utile.
;
About one hour after checkout, the manual was available for download. Clear reading and detailed. Thanks
;
Excellent transaction - clean document received - Thanks a lot
;
Manual is in German but complete. I needed this one to fix a long lasting problem with the internal PSU of the camera. Most of the capacitors begin to leak after a few years wich results in the inability to power on the camera. When you try to turn it on the power led flickers and the unit directly turns off. Thanks to this manual I was able to locate all bad cap's and to dis- and reassemble the camera without any problems.
2-5
1.
Remove Thermal Switch and Fan
Unscrew 1 screw to remove the Thermal Switch. Note: When assembling the Thermal Switch, please be aware of the Wire Arrangement. (The wire needs to be arranged as the Picture shows; otherwise, it might cause the Main Moard difficult to be assembled.)
2.
Remove the Fan directly. Note: When assembling the Fan, please be aware of the Fan Wire should be placed in the �upper left� side. Fan Wire
2-9
TDP-P8
|
