|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I've been looking for a copy of the original user/owner manual. Just what the doctor ordered, thank you.
;
the manual was very helpful thank you very much no one else was able to help me thanx
;
This is an excellent handbook. We had no information on the appliance until we obtained this and are now able to use the appliance to its full potential. Strongly recommended.
;
Very happy to find this from owners-manual.com and the enclosed spec sheet as well.
Not longer available from Sony.
;
The Owner's manual was very helpful. The WEGA is about 35 years old and needed repair.
Your Website is pretty good und easily to handle.
Thank You
Carl-W. Lohmann
Operating Instructions
RG B &D M O DE
All three lamps are individually dimmable giving the user the ability to customize or create the color of choice. This mode offers the user complete freedom. 1) 2) A steady hold of the MODE button will change the operating mode once then release the button. Repeat step 1 until you arrive at the RGB&D operating mode, as indicated by the led next to the label.
Channel 1 2 3 4
Function Red Green Blue Dimmer
3)
The display will now read parameter A: which represents the DMX channel address value. Use the UP and DOWN buttons to change values.
C& B M O DE
This is called the Color and Brightness mode. Use channel 1 to move across the RGB spectrum. 1) 2) 3) A steady hold of the MODE button will change the operating mode once then release the button. Repeat step 1 until you arrive at the C&B operating mode, as indicated by the led next to the label. Channel Function 1 2 Spectrum Color Mix Dimmer
See Color Mix Table in the appendix section.
The display will now read parameter A: which represents the DMX channel address value. Use the UP and DOWN buttons to change values.
RG B & C H AS E M O D E
This is the most diverse operating mode the Stage Wash has to offer. It allows individual RGB mix control when needed while still maintaining the ability to run built in automated chase programs. 1) 2) 3) A steady hold of the MODE button will change the operating mode once then release the button. Repeat step 1 until both the RGB&D and the C&B led turn on. The display will now read parameter A: which represents the DMX channel address value. Use the UP and DOWN buttons to change values. Channel Function 1 2 3 4 Control Mode Red or Dimming Green or Fade Blue or Speed
TFX-950CM User Manual
10
Revision: 2006-01-20/16:37
|
|
|
> |
|
