|
There are currently no product reviews.
 ;
Item as described, very well detailed manual with complete schematics. I've received the download information shortly after payment, very good support.
 ;
Really good and well scanned. File is complete the full service manual for 5$
;
Good product and very helpfull to repair. Many thanks.
;
Very good product. Best service manual. Many thanks
;
I am only search for 5 Minute, by it in 5 Minutes to and get ist in few ours! Best i found in the Internet and my Amplifer is repaired as well! Thank you
TH-50PHW6BX / TH-50PHW6EX / TH-50PHD6EX / TH-50PHD6BX / TH-50PHD6UY
11 Trouble shooting guide
11.1. Self Check
1. Self-check is used to automatically check the bus line controlled circuit of the Plasma display. 2. To get into the Self-check mode, press the volume down button on the customer controls at the front of the set, at the same time pressing the OFF-TIMER button on the remote control, and the screen will show :If the CCU ports have been checked and found to be incorrect Or not located then " - - " will appear in place of " OK "
11.2. No Power
11.2.1. Power LED Blinking timing chart
1. Subject Information of LED Flashing timing chart. 2. Contents When an abnormality has occurred the unit, the protection circuit operates and reset to the stand by mode. At this time, the defective block can be identified by the number of blinkes of the Power LED on the front panel of the unit.
3. Remarks Above Fan function is operated during the fans are installed. 26
|
