I purchased a vintage Sony mixer off eBay and within the hour was able to locate and purchase the manual for it.I mean really,where else can you find a manual for a product made in 1983!? It was easy to find and purchase/download the manual I needed.I will use this site again for other equipment I have! Great site!
perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Well Well Well!!!! Good manual perfect for my hobby!!! As Before you have done a very well done work!!!! Thank you
Text excerpt from page 42 (click to view)
MAIN MENU Settings
Changing the DECODE MODE
(See page 18) This option is used to change the digital audio decode mode. The default setting of [AUTO/PCM] is recommended for regular use. When the playback source is DVD, you may select a DECODE MODE.
3.
Use the 2/3 cursors to set the DSP mode.
When the source is DVD: You may choose between �SURROUND� j �OFF� When the source is not DVD or TUNER*: You may choose between j SURROUND j THEATER j LIVE CLUB j DANCE CLUB j HALL j PAVILION j OFF j (back to the beginning) * When the source is set to tuner, the MAIN MENU will not be displayed.
1. 2.
Open the MAIN MENU
See page 39, �Opening the MAIN MENU�.
Move the pointer to DECODE MODE using the 5/� cursors.
Adjusting the volume
(See page 16)
1. 3.
Use the 2/3 cursors to set the decode mode.
The following decoding options are available: AUTO/PCM, DOLBY DIGITAL, or DTS. � See page 18 for details of each in decode mode.
Open the MAIN MENU.
See page 39, �Opening the MAIN MENU�.
2.
Move the pointer to VOLUME using the 5/� cursors.
Note: � Only audio for discs for the selected decode mode may be played when a decode mode other than �AUTO/PCM� is selected. When the decode mode is changed and a disk has been played back, return the decode mode to �AUTO/PCM�.
3.
Use the 2/3 cursors to adjust the volume level.
Press 3 to increase the volume. Press 2 to decrease the volume.
Changing the DSP MODE
(See page 20)
1. 2.
Open the MAIN MENU.
See page 39, �Opening the MAIN MENU�.
Move the pointer to DSP MODE using the 5/� cursors.
