|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Complete MFG Service Manual at a good price FAST !
;
Downloaded the manual, reasonably straightforward, pretty much exactly as advertised.
 ;
very helpfull
circuit diagram and sparepart list available
;
Very good reproduction (copy) of original manual. Didn't have a parts list, but schematic was completely labeled with parts. Complete instructions on how to adjust mechanical functions of the 8-track deck. Well worth having and at a very reasonable cost.
;
It's a full manual. All the parts are in there. I haven't found the problem yett, but I am working on it; hope I can rebuild the part myself. To make it more secure and unbreakable this time. Because the part has failed several times before and costs a lot to let it be repaired.
Thanks so much for this rich illustrated and parted manual.
TH-K2AT/K2E/K2ET
ADJUSTMENT
J. 13.8V TX M power (Lower limit frequency, center frequency, upper limit frequency) 113.8V TX M power (Lower limit frequency) (1) Press the [LAMP] or [MONI] key on the transceiver to display �P13L� on the LCD. In this case, the � � icon appears. The current APC value is displayed at the lower digits of the frequency display, and the value stored in the EEPROM is displayed on the memory channel number display. (4) Repeat steps (4) to (7) of �113.8V TX M power (Lower limit frequency)� described on page 32. K. 13.8V TX L power (Lower limit frequency, center frequency, upper limit frequency) 113.8V TX L power (Lower limit frequency) (1) Press the [LAMP] or [MONI] key on the transceiver to display �P13L� on the LCD. In this case, the � � icon appears. The current APC value is displayed at the lower digits of the frequency display, and the value stored in the EEPROM is displayed on the memory channel number display.
(2) Press the [VFO], [MR] or [CALL] key to switch to the frequency display. (3) Turn the encoder to display the lower limit frequency on the LCD. (4) Press the [CALL] key to switch to the adjustment display. (5) Press the [PTT] key to enable the transmit mode. (6) Turn the encoder to change the current APC value and adjust the transmission power. (7) Press the [MENU] key to write the current APC value into the EEPROM. 213.8V TX M power (Center frequency) (1) Press the [LAMP] or [MONI] key on the transceiver to display �P13C� on the LCD. In this case, the � � icon appears.
(2) Press the [VFO], [MR] or [CALL] key to switch to the frequency display. (3) Turn the encoder to display the lower limit frequency on the LCD. (4) Press the [CALL] key to switch to the adjustment display. (5) Press the [PTT] key to enable transmit mode. (6) Turn the encoder to change the current APC value and adjust transmission power. (7) Press the [MENU] key to write the current APC value into the EEPROM. 213.8V TX L power (Center frequency) (1) Press the [LAMP] or [MONI] key on the transceiver to display �P13C� on the LCD. In this case, the � � icon appears.
(2) Press the [VFO], [MR] or [CALL] key to switch to the frequency display. (3) Turn the encoder to display the center frequency on the LCD. (4) Repeat steps (4) to (7) of �113.8V TX M power (Lower limit frequency)� described on page 31. 313.8V TX M power (Upper limit frequency) (1) Press the [LAMP] or [MONI] key on the transceiver to display �P13H� on the LCD. In this case, the � � icon appears.
(2) Press the [VFO], [MR] or [CALL] key to switch to the frequency display. (3) Turn the encoder to display the center frequency on the LCD. (4) Repeat steps (4) to (7) of �113.8V TX L power (Lower limit frequency)� described on page 32. 313.8V TX L power (Upper limit frequency) (1) Press the [LAMP] or [MONI] key on the transceiver to display �P13H� on the LCD. In this case, the � � icon appears.
(2) Press the [VFO], [MR] or [CALL] key to switch to the frequency display. (3) Turn the encoder to display the upper limit frequency on the LCD. 32
|
|
|
> |
|
