This is one of four manuals I have downloaded recently.
Purchase was very straight forward and the authorising email arrived in about 4 hours.
The quality of the scan is good. Print is clear and square to the page edges.
Exactly as advertized. High quality digital copy of the Nak 610 user manual. Easy download and access. Highly recommended.
Text excerpt from page 14 (click to view)
Connections
Do not connect the power cord until all other connections have been made.
This page is for TH-S55
The satellite speakers are equipped with their speaker cords attached directly to their speaker unit instead of having speaker terminals on their cabinet. Before connecting the speaker cords; Twist and pull the insulation coat off and remove.
Speaker cord
� Connect the black cords to the black (r) terminals. � Connect the white cords to the (q) terminals referring to the table below:
Front speakers SP-THS55F
FRONT SPEAKERS (LEFT) FRONT SPEAKERS (RIGHT)
FROM XV-THC3 XV-THS55 XV-THS58 XV-THS66
White Red Green Blue Gray
CENTER SPEAKER SURROUND SPEAKERS (LEFT) SURROUND SPEAKERS (RIGHT)
4�
16�
Powered subwoofer SP-PWS55
Surround speakers SP-THS55S
Center speaker SP-THS55C
CAUTION
� When you connect speakers other than the supplied ones, use speakers of the same speaker impedance (SPEAKER IMPEDANCE) indicated near the speaker terminals on the rear of the powered subwoofer. � DO NOT connect more than one speaker to one speaker terminal.
Precautions for daily use � When moving the speakers, do not pull the speaker cords; otherwise, the speakers may fall over, causing damage or injury. � Do not reproduce sounds at so high a volume that they are distorted; otherwise, the speakers may be damaged by internal heat buildup.
