|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
exactly as they say. Within 24 hours the link to the pages and offcourse it was the right service manual. Super and thanks
 ;
The manual was exact the thing that was promised. My old car stereo is working again thanks to the information supplied.
;
I PURHASED THIS PRODUCT BECAUSE I WAS HAVING PROBLEMS WITH MY CDR20 HARMAN KARDON RECORDER. WHICH I PURCHASED NEW 12 YEARS AGO. AFTER REVIEWING THE MANUAL, I WAS ABLE TO ADJUST THE TENSIONER IN THE SYSTEM. WORKS LIKE A CHAMP!.
SAVED ME AT LEAST 100.00 WHICH WAS WHAT A SERVICE REPAIR STATION WANTED. GREAT MANUAL EASY TO READ. SPECIALLY AFTER I PRINTED THE PAGES WHICH DEALT WITH MY RECORDER. THANKS A LOT!!!!!!!!
;
You can fully trust on this one!
All the schematics are very crear an in one piece per page
;
I have never bought a service manual which is as competely readable as this althogh it was a scanned pdf. Thank you for this succesful manual also cheaper than other sites.
TK-260G/270G
DISASSEMBLY FOR REPAIR
Separating the case assembly from the chassis.
1. Remove the two knobs z and three round units x. 2. Remove the two screws c. 3. Expand the right and left sides of the bottom of the case assembly, lift the chassis, and remove it from the case assembly v.
TK-260G
Separating the chassis from the unit. � TK-260G
1. Remove the twelve small screws m, and the three large screws ,. 2. Remove the solder from the antenna terminal using a soldering iron, then lift the unit off (X57).
� �
stopper
TK-270G
� TK-270G
1. Remove the three screws .. Lift the unit (X54), and rise up the connecter lever in the arrow with your finger /. Remove the three hexagonal bosses-, and remove the 1 1 twelve screws m. 2. Remove the solder from the antenna terminal using a soldering iron, then lift the unit off (X57).
�
�� �
� � �
TK-270G
� �
X54-
� �
� � �
�
X57-
Antenna teminal
� 4. Taking cure not to cut the speaker lead b, open the chassis and case assembly, and pull the speaker lead with connector n. � �
X57-
��
�
�� �
� �� �
�
�
b
CN3
n
16
|
|
|
> |
|
