|
Who's Online
There currently are 5803 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
As Always you can find here manuals even of difficult TV scheme which are scan in almost perfect way.clear and fast!!!!!
Great work thanks!
;
Incredibly clear!!!! Well done, complete and wonderful. It could not better than this!!!!
;
Thank You for fast delivery for the sheme.
Everything allright.
Thanks & best regards Franz
;
again you did a very good job. It was fast too. Photocopy are really readable and clear
;
Probably it never existed a 1081 official service manual from Commodore, it's look more like a NAPCEC service manual & diagrams compilation of the 1084 series and his variants, like the nap6523, 8cm505, 1084S, 1084P and obviously the 1081. It's more complete than other scans and the quality of the scans also are far superior. It has two circuit diagrams variants of the 1081, mono and stereo versions. It doesn't include a diagram for the Philips CM8500 or CM8501, they look like the 1081 but they are slightly different.
TK-3107
DISASSEMBLY FOR REPAIR
Separating the case assembly from the chassis
1. Remove the two knobs � and three round nuts �. 2. Remove the two screws �. 3. Expand the right and left sides of the bottom of the case assembly, Iift the chassis, and remove it from the case assembly �.
Separating the chassis from the unit
1. Remove the eleven screws �. 2. Remove the solder from the antenna terminal using a soldering iron then lift the unit off �. 3. Remove the two screws � and remove the antenna connector. Note : When reassembling the unit in the chassis, be sure to solder the antenna terminal.
Antenna terminal
4. Taking care not to cut the speaker lead �, open the chassis and case assembly.
Removing the lever
1. Raise the lever on the lower case �, insert a small flat screwdriver into the space between the case and lever, open the case carefully � and lift the lever off. Note : Do not force to separate the case from the lever.
Lever knob Cace assembly
4
|
|
|
> |
|