|
There are currently no product reviews.
 ;
Owner-manuals.com is the best Possibility to give vantage HIGH CLASS Elektronic COMPONENTS
a new Life.Thanks alot for your perfekt Service.
;
I am proud of you. In the future, I benefited from your services.
;
I found this manual to be complete in every detail. Besides the schematic it has a complete set of alignment instructions which are easy to understand. It also includes a complete parts list as well as an explanation of how the power supply and safety shutdown circuits operate. Even a schematic of the tuner is included.
 ;
The product was good and just what I needed, however I had moderate difficulty with the down load because the sight would not recognize my pass word. I was finally given a direct link to the manual and that worked.
;
Very quick and easy website to use and fast download of manual, quality of manual is excellent and will be pleased to use this service again in the future, thanks so much!
TK-860G/862G
Receiver Section
Center Frequency 49.95MHz
TK-860G/862G
LEVEL DIAGRAM
450kHz
Audio Frequency
To make measurements in the RF section, connect the RF level meter. In the RF section, use a 0.01µF coupling capacitor. (The display shows the SSG input value required to obtain 12dB SINAD.) To make measurements in the AF section, connect the AC level meter. (ANT input : �53dBm, 1kHz FM, 3kHz DEV (Wide) / 1.5kHz DEV (Narrow)) The AF output level is adjusted for 0.45V/4� by the front panel AF VOL control.
Transmitter Section
Control Unit TX-RX Unit VCO Unit TX-RX Unit Power Module TX-RX Unit
To make measurements in the AF section, connect the AC level meter. AG is set so that MIC input becomes 3kHz/1.5kHz (Wide/Narrow) DEV at 1kHz MOD.
To make measurements in the RF section, connect the RF wattmeter (50�).
78
79
|
