|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Very detailed product, also it is a scanning from original, very useful if you have to service this type of amplifier ! Very good product, very hard to find!
;
the Manual was made available as promised, the scans were excellent..Good Work !!!
;
It's complete and helpful manual with good quality of scan. Thanks very much.
;
The service was quick and simple, finding the service manual easy and it appears to be the original with colour schematics. It contained the info I was after and so sorted the problem.
I have copied it to CD and attached the envelope to the inside back cover of the owners manual. Good manual and excelent service. Robin Wood, Wood Electronics, New Zealand.
;
Exactly what was needed to assess the product - excellent value and great service
12. Leave the LCD block until the adhesive is hardened for a required time. In this case, place a thin paper on the LCD block to prevent dusts from entering. 13. When the adhesive is hardened, connect the FPC of the LCD to the connector of the PC board, and turn on the power. Check to see pixel deviation of the LCD. 14. Check to see dusts of the LCD. If dusts are found, remove them. 15. Turn the power off. Remove all the cables connected to the PC board and LCD panel, and remove the drive PC board. 16. Turn on the power and check operations.
Fig. 1-3-8
Fig. 1-3-9
Fig. 1-3-10
1-5
|
|
|
> |
|
