My first manual from Owner-Manuals.com but not the last! I am very satisfied with the easy ordering and promt delivery of a manual I did not find anywhere else.
This manual is very helpfull to use the Power Supply. All technical information has been available.
For service use the circuit diagrams are very good.
Thanks .
Very comprehensive document which is a must-have for any Satellit 2100 owner whose set up is somewhat intricate. Due to the bad quality of the pictures that are rather dark and a bit blurred I gave 4-star feedback.
The manual was missing 2 pages but when I presented the problem to the company they made every attempt to get the 2 pages to me, when they couldn't they refunded my money. A very pleasing and easy transaction. The manual they provided was the original, it was concise and to the point. I plan to do business with this company again when should the need arise.
Text excerpt from page 10 (click to view)
The tumble dryer must be installed in a clean place, where dirt does not build up. Make sure there are no obstructing items or material near the air-intake louvres provided at the back (e.g. paper, rags etc.).
Door reversal
To make it easier to load or unload the laundry the door can be reversed. This operation must be carried out by qualified personnel. Operate as follows: - Remove the door by unscrewing the two screws (1) fastening the hinge to the cabinet (Fig. A). - Remove the safety catch (2) and the plug (3) by bending the two fastening tags (Fig. A). - Refit the safety catch (2) and plug (3) on the door by reversing their positions (Fig. B). - Remove the plastic plate (4) by unscrewing the two fastening screws (Fig. A). - Refit the the plastic plate (4) on the opposite side (Fig. B). - Refit the door by screwing in the two screws (1) which fasten the door to the cabinet (Fig. B).
P0281
Important When operating the tumble dryer, the room temperature must not exceed 35°C, as it may affect the performance of the appliance. To save energy, the room temperature should not be lower than +15°C.
Levelling
Level the tumble dryer into place by screwing or unscrewing the front feet as required. Accurate levelling will keep vibration and noise to a minimum when the dryer is in use.
3 P0283 1 4 2