Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
Text excerpt from page 20 (click to view)
Selecting the setting �SQ LO� reduces the squelch threshold, selecting the setting �SQ HI� increases the squelch threshold. Adjust the squelch threshold � with the transmitter switched off � to the lowest possible setting that suppresses hissing noise.
IMPORTANT!
Note:
If the squelch threshold is adjusted too high, the transmission range will be reduced. Therefore, always adjust the squelch threshold to the lowest possible setting. When in the setting mode of the �SQELCH� menu, pressing the button for more than three seconds will switch the squelch off. �SQ.OFF� flashes on the display. If no RF signal is being received, hissing noise will occur. This setting is for test purposes only.
LTD
Limiting the volume at the headphone output
Via the �LTD� menu, you can switch the limiter on and off. With the limiter switched on, the maximum possible volume of the headphone output will be reduced about approx. 15 dB.
Note:
The receiver is preset so that the limiter is switched on. We recommend to keep the limiter switched on all the time.